[PATCH v6 09/10] dt-bindings: firmware: add arm,ras-cper

Describe the DeviceTree node that exposes the Arm firmware-first CPER
provider and hook the file into MAINTAINERS so the binding has an
owner.

The initial user is the upstream zena-css platform, validated so far
on FVP.

Signed-off-by: Ahmed Tiba <[email protected]>
---
 .../devicetree/bindings/firmware/arm,ras-cper.yaml | 52 ++++++++++++++++++++++
 MAINTAINERS                                        |  5 +++
 2 files changed, 57 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/arm,ras-cper.yaml b/Documentation/devicetree/bindings/firmware/arm,ras-cper.yaml
new file mode 100644
index 000000000000..23d54008230d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/arm,ras-cper.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/arm,ras-cper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RAS CPER provider
+
+maintainers:
+  - Ahmed Tiba <[email protected]>
+
+description:
+  Arm Reliability, Availability and Serviceability (RAS) firmware can expose
+  a firmware-first CPER error source directly via DeviceTree. Firmware
+  provides the CPER Generic Error Status block and notifies the OS through
+  an interrupt.
+
+properties:
+  compatible:
+    const: arm,ras-cper
+
+  memory-region:
+    items:
+      - description:
+          CPER Generic Error Status block exposed by firmware.
+      - description:
+          Firmware-owned ack buffer. Firmware watches bit 0 and expects the
+          OS to set it once the current status block has been consumed
+          before the CPER buffer is overwritten.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt used to signal that a new status record is ready.
+
+required:
+  - compatible
+  - memory-region
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    error-handler {
+      compatible = "arm,ras-cper";
+      memory-region = <&ras_cper_buffer>, <&ras_cper_ack>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d6db8cb608f..5aa495fdff72 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22322,6 +22322,11 @@ M:	Alexandre Bounine <[email protected]>
 S:	Maintained
 F:	drivers/rapidio/
 
+RAS ERROR STATUS
+M:	Ahmed Tiba <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/firmware/arm,ras-cper.yaml
+
 RAS INFRASTRUCTURE
 M:	Tony Luck <[email protected]>
 M:	Borislav Petkov <[email protected]>

-- 
2.43.0