Re: [PATCH v3 4/4] edac: xilinx: Add EDAC support for Versal XilSem

> Xilinx Versal Soft Error Mitigation (XilSEM) is responsible for reporting
> and optionally correcting soft errors in Configuration Memory of Versal.
> The Configuration Memory includes Configuration RAM and
> Network on Chip (NoC) peripheral interconnect (NPI) Registers.
> 
> The Configuration RAM (CRAM) memory is used for storing configuration
> data for the programmable logic (PL) fabric. The NPI registers are used
> for configuring the memory controllers, miscellaneous integrated hardware,
> NoC interface units in the Veral device.
> 
> Add support to handle correctable and uncorrectable error events
> from XilSEM.
> 
> Add sysfs interface for XilSEM scan operations
> initialize, start, stop scan, error inject, read ECC, scan status and
> configuration values.
> 
> Signed-off-by: Rama devi Veggalam <[email protected]>
> ---
<snip>

>   static int mc_probe(struct platform_device *pdev)
>   {
> -	void __iomem *ddrmc_baseaddr, *ddrmc_noc_baseaddr;
> +	void __iomem *ddrmc_baseaddr, *ddrmc_noc_baseaddr, *sem_baseaddr;
>   	struct edac_mc_layer layers[2];
>   	struct mem_ctl_info *mci;
>   	u8 num_chans, num_csrows;
>   	struct edac_priv *priv;
>   	u32 edac_mc_id, regval;
> +	u32 family_code;
>   	int rc;
>   
>   	ddrmc_baseaddr = devm_platform_ioremap_resource_byname(pdev, "base");
> @@ -1094,6 +2365,10 @@ static int mc_probe(struct platform_device *pdev)
>   	if (!get_ecc_state(ddrmc_baseaddr))
>   		return -ENXIO;
>   
> +	sem_baseaddr = devm_platform_ioremap_resource_byname(pdev, "semrtca");
> +	if (IS_ERR(sem_baseaddr))
> +		return PTR_ERR(sem_baseaddr);
> +

As mentioned by Krzysztof in DT review this change breaks existing
system. Please ioremap this semrtca resource only for xilSEM support.
We can make use of compatible based match data.

>   	/* Allocate ID number for the EMIF controller */
>   	edac_mc_id = emif_get_id(pdev->dev.of_node);
>   
> @@ -1124,9 +2399,29 @@ static int mc_probe(struct platform_device *pdev)
>   	priv = mci->pvt_info;
>   	priv->ddrmc_baseaddr = ddrmc_baseaddr;
>   	priv->ddrmc_noc_baseaddr = ddrmc_noc_baseaddr;
> +	priv->sem_baseaddr = sem_baseaddr;
>   	priv->ce_cnt = 0;
>   	priv->ue_cnt = 0;
>   	priv->mc_id = edac_mc_id;
> +	priv->xsem_rtca = NULL;
> +
> +	/* Allocate and initialize XilSem RTCA structure */
> +	priv->xsem_rtca = devm_kzalloc(&pdev->dev,
> +				       sizeof(struct xsem_rtca_priv),
> +				       GFP_KERNEL);
> +	if (!priv->xsem_rtca) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "Failed to allocate xsem_rtca\n");
> +		rc = -ENOMEM;
> +		goto free_edac_mc;
> +	}
> +
> +	priv->xsem_rtca->slr_info = devm_kzalloc(&pdev->dev, sizeof(struct xsem_ssit_status),
> +						 GFP_KERNEL);
> +	if (!priv->xsem_rtca->slr_info) {
> +		rc = -ENOMEM;
> +		goto free_edac_mc;
> +	}
>   
>   	mc_init(mci, pdev);
>   
> @@ -1147,6 +2442,41 @@ static int mc_probe(struct platform_device *pdev)
>   		goto del_mc;
>   	}
>   
> +	/* Create XilSem sysfs attributes only if XilSem is available */
> +	rc = xsem_edac_create_sysfs_attributes(mci);
> +	if (rc) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "Failed to create sysfs entries\n");
> +		goto remove_sysfs;
> +	}
> +
> +	/*
> +	 * Firmware driver returns -ENODEV if it is not probed. In this case
> +	 * defer XilSEM error event registration.
> +	 */
> +	rc = zynqmp_pm_get_family_info(&family_code);
> +	if (rc) {
> +		if (rc == -ENODEV)
> +			rc = -EPROBE_DEFER;
> +
> +		goto del_mc;
> +	}
> +	if (family_code == PM_VERSAL_FAMILY_CODE) {
> +		priv->xsem_rtca->sw_event_node_id = VERSAL_EVENT_ERROR_SW_ERR;
> +		priv->xsem_rtca->cram_ce_mask = XPM_VERSAL_EVENT_ERROR_MASK_XSEM_CRAM_CE_5;
> +		priv->xsem_rtca->cram_ue_mask = XPM_VERSAL_EVENT_ERROR_MASK_XSEM_CRAM_UE_6;
> +		priv->xsem_rtca->npi_ue_mask = XPM_VERSAL_EVENT_ERROR_MASK_XSEM_NPI_UE_7;
> +	} else {
> +		edac_printk(KERN_ERR, EDAC_MC, "Invalid Device family code %d\n", family_code);
> +	}
> +
> +	rc = xlnx_register_event(PM_NOTIFY_CB, priv->xsem_rtca->sw_event_node_id,
> +				 priv->xsem_rtca->cram_ce_mask | priv->xsem_rtca->cram_ue_mask |
> +				 priv->xsem_rtca->npi_ue_mask,
> +				 false, xsem_err_callback, mci);
> +	if (rc)
> +		goto del_mc;
> +
>   #ifdef CONFIG_EDAC_DEBUG
>   	create_debugfs_attributes(mci);
>   	setup_address_map(priv);
> @@ -1154,6 +2484,8 @@ static int mc_probe(struct platform_device *pdev)
>   	enable_intr(priv);
>   	return rc;
>   
> +remove_sysfs:
> +	xsem_edac_remove_sysfs_attributes(mci);
>   del_mc:
>   	edac_mc_del_mc(&pdev->dev);
>   free_edac_mc:
> @@ -1173,9 +2505,21 @@ static void mc_remove(struct platform_device *pdev)
>   	debugfs_remove_recursive(priv->debugfs);
>   #endif
>   
> +	/* Unregister XilSem events if they were registered */
> +	if (priv->xsem_rtca) {
> +		xlnx_unregister_event(PM_NOTIFY_CB, priv->xsem_rtca->sw_event_node_id,
> +				      priv->xsem_rtca->cram_ce_mask |
> +					  priv->xsem_rtca->cram_ue_mask |
> +					  priv->xsem_rtca->npi_ue_mask,
> +				      xsem_err_callback, mci);
> +	}
>   	xlnx_unregister_event(PM_NOTIFY_CB, VERSAL_EVENT_ERROR_PMC_ERR1,
>   			      XPM_EVENT_ERROR_MASK_DDRMC_CR |
>   			      XPM_EVENT_ERROR_MASK_DDRMC_NCR, err_callback, mci);
> +	/* Remove XilSem sysfs attributes if they were created */
> +	if (priv->xsem_rtca)
> +		xsem_edac_remove_sysfs_attributes(mci);
> +
>   	edac_mc_del_mc(&pdev->dev);
>   	edac_mc_free(mci);
>   }