Re: MCE Errors and Crash/Reboot on Fresh Fedora Linux 44
Hugo Whitaker <[email protected]> Sat, 11 Jul 2026 19:53:00 -0600
| Newsgroups | org.kernel.vger.linux-edac |
|---|---|
| Message-ID | <CAMVs2dSHgjJ-b8K+M5qBug0Fo0PVCGAqH9wP2j6SBvgJZdUJMg@mail.gmail.com> |
Files from the .config file and dmesg command. On Sat, Jul 11, 2026 at 7:52 PM Hugo Whitaker <[email protected]> wrote: > After booting Fedora 44 (7.1.3), the kernel will log MCE corrected errors > nearly constantly, then crash my computer. > > Starting a new Fedora Linux install on my Vivobook Pro, moving from > Windows 11, results in several crashes/reboots, about 1-3 times per day. > Switching to acpi-cpufreq driver has reduced this, but still to about > once per day. This event is seemingly random and interrupts my daily > activities. Likely high severity due to the crashes, but otherwise unsure. > > The detailed description: After using my ASUS Vivobook Pro for about a > year, I switched from Windows 11 to Fedora Linux 44 7.1.3 a week ago. I > never had any problems on Windows 11. Since then, I have been getting > crashes after several hours of not restarting. Leaving the computer on > overnight will cause a crash 1-2 minutes after logging in. I have gone > through multiple steps to remove this problem with the assistance of AI. I > reinstalled a fresh Linux (the same latest version as of writing this, > 7.1.3), live booted from a USB, dual booted with Windows, and used the > latest vanilla version > (7.2.0-0.rc2.260711.dd3210c4.322.vanilla.fc44.x86_64) but they all seem to > have the same problem. I checked a stress test on Windows 11 and saw that > there was no errors reported through WHEA-Logger, it doesn't appear to be a > thermal problem, my CPU temps were at about 85 C average and 92 C max after > stress testing the CPU. > > Steps to reproduce (Note: no errors are logged when the lid is closed): > > - Install Fedora Linux 44 (KDE Plasma) > - Create a user / login > - (optional): Install Steam (I did this in my first and second > installs of Fedora) > - Wait for about 5-10 minutes for MCE errors in journalctl > - Wait for an indeterminate amount of time for the computer to > restart, this is always under 3 hours as long as the computer is turned on > > hugowhitaker@fedora-mbv:~$ cat /proc/version Linux version > 7.2.0-0.rc2.260711.dd3210c4.322.vanilla.fc44.x86_64 > (mockbuild@1e2118f8b432450cb13e5f2c2f631a65) (gcc (GCC) 16.1.1 20260515 > (Red Hat 16.1.1-2 ), GNU ld version 2.46-3.fc44) #1 SMP PREEMPT_DYNAMIC Sat > Jul 11 06:07:04 UTC 2026 > > hugowhitaker@fedora-mbv:~$ hostnamectl | grep "Operating System" > Operating System: Fedora Linux 44 (KDE Plasma Desktop Edition) > > hugowhitaker@fedora-mbv:~$ uname -mi x86_64 unknown > > Where I found the errors, these accumulate every 3-10 minutes: > > hugowhitaker@fedora-mbv:~$ sudo journalctl -b 0 -p 3 | grep "CPU:1. (19:44:1)" > [sudo] password for hugowhitaker: > Jul 11 11:38:20 fedora-mbv kernel: [Hardware Error]: CPU:10 (19:44:1) MC0_STATUS[Over|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0xdc20400001010135 > Jul 11 12:09:05 fedora-mbv kernel: [Hardware Error]: CPU:11 (19:44:1) MC0_STATUS[Over|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0xdc20400001010135 > Jul 11 12:09:05 fedora-mbv kernel: [Hardware Error]: CPU:10 (19:44:1) MC0_STATUS[Over|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0xdc20400001010135 > Jul 11 12:11:37 fedora-mbv kernel: [Hardware Error]: CPU:11 (19:44:1) MC0_STATUS[-|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0x9c20400001010135 > Jul 11 12:11:37 fedora-mbv kernel: [Hardware Error]: CPU:10 (19:44:1) MC0_STATUS[Over|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0xdc20400001010135 > Jul 11 12:12:54 fedora-mbv kernel: [Hardware Error]: CPU:10 (19:44:1) MC0_STATUS[-|CE|MiscV|AddrV|-|-|SyndV|CECC|-|-|-]: 0x9c20400001010135 > > hugowhitaker@fedora-mbv:~$ sudo journalctl -b 0 -k > > Will be provided through another reply to this email > > Processors: 16 × AMD Ryzen 7 6800H with Radeon Graphics > > Product: Vivobook_ASUSLaptop M6400RC_M6400RC > > Final Note: > I'm a new software engineer, I only have about a year of college > experience, I had Claude AI hold my hand through this whole process, > debugging for hours and checking system files and logs. I didn't know what > half of it meant but I had a rough idea. If you would like more > information, or even a better report, go to this GitHub repo that has > Claude's response under "Claude Report.md". Good luck and I hope you have a > good day! > https://github.com/PhoenixGamer128/MCE-Error-Linux-Bug-Info/tree/main >
config.txt
(text/plain, 293.4 KB) - not displayed
dmesg.txt
(text/plain, 142.9 KB) - not displayed