[RFC PATCH 3/6] fbdev: honour the device tree boot logo placement properties
Max Pedraza <[email protected]> Fri, 31 Jul 2026 23:50:40 +0200
| Newsgroups | org.kernel.vger.linux-fbdev,org.freedesktop.lists.dri-devel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
A logo supplied by the device tree describes a specific product, so where it lands on the panel matters in a way it does not for the built-in Tux. Honour the optional "logo-position", "logo-offset", "logo-centered" and "logo-rotation" properties of the "linux,boot-logo-clut224" node. The rotation is folded into the rotate argument at the entry points, so fb_prepare_logo() reserves the right amount of space and fb_do_show_logo() tiles in the same direction the image was rotated in. Placement is applied after fb_rotate_logo(), since a rotation swaps the image width and height and centring needs the final dimensions. fb_prepare_logo() has to grow its reservation to cover wherever the logo ends up, the way fb_center_logo already does: fbcon only leaves the first n rows alone, so a logo placed further down is drawn and then immediately cleared by the console. "logo-centered" is deliberately close to the existing fb_center_logo, but it is per device tree rather than per fbcon command line, and it composes with "logo-offset" so that a logo can be centred and then nudged. That combination is what panels with a partially visible area need, where the usable region is not the centre of the mode. Signed-off-by: Max Pedraza <[email protected]> --- drivers/video/fbdev/core/fb_logo.c | 174 +++++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) diff --git a/drivers/video/fbdev/core/fb_logo.c b/drivers/video/fbdev/core/fb_logo.c index 0bab8352b..bfc1b72ce 100644 --- a/drivers/video/fbdev/core/fb_logo.c +++ b/drivers/video/fbdev/core/fb_logo.c @@ -2,12 +2,178 @@ #include <linux/fb.h> #include <linux/linux_logo.h> +#include <linux/of.h> #include "fb_internal.h" bool fb_center_logo __read_mostly; int fb_logo_count __read_mostly = -1; +#ifdef CONFIG_LOGO_DT_CLUT224 + +/* + * Placement of a logo supplied by the device tree. The image itself is parsed + * by drivers/video/logo/logo.c, here we only care about where it goes. + */ +struct fb_logo_dt_placement { + bool valid; + bool centered; + bool has_position; + int rotation; /* FB_ROTATE_*, or -1 when unspecified */ + u32 x, y; + s32 offset_x, offset_y; +}; + +static struct fb_logo_dt_placement fb_logo_dt; + +static int fb_logo_dt_parse_rotation(const char *rotation) +{ + if (!strcmp(rotation, "none")) + return FB_ROTATE_UR; + if (!strcmp(rotation, "cw")) + return FB_ROTATE_CW; + if (!strcmp(rotation, "ud")) + return FB_ROTATE_UD; + if (!strcmp(rotation, "ccw")) + return FB_ROTATE_CCW; + + return -EINVAL; +} + +static void fb_logo_dt_read(void) +{ + struct fb_logo_dt_placement *p = &fb_logo_dt; + static bool read_done; + struct device_node *np; + const char *rotation; + u32 val[2]; + int rot; + + if (read_done) + return; + + read_done = true; + + np = of_find_compatible_node(NULL, NULL, "linux,boot-logo-clut224"); + if (!np) + return; + + if (!of_device_is_available(np)) + goto out; + + p->valid = true; + p->rotation = -1; + p->centered = of_property_read_bool(np, "logo-centered"); + + if (!of_property_read_u32_array(np, "logo-position", val, 2)) { + p->has_position = true; + p->x = val[0]; + p->y = val[1]; + } + + if (!of_property_read_u32_array(np, "logo-offset", val, 2)) { + p->offset_x = (s32)val[0]; + p->offset_y = (s32)val[1]; + } + + if (!of_property_read_string(np, "logo-rotation", &rotation)) { + rot = fb_logo_dt_parse_rotation(rotation); + if (rot < 0) + pr_warn("fb: %pOF: unknown logo-rotation \"%s\"\n", + np, rotation); + else + p->rotation = rot; + } + +out: + of_node_put(np); +} + +static int fb_logo_dt_rotation(int rotate) +{ + fb_logo_dt_read(); + + if (fb_logo_dt.valid && fb_logo_dt.rotation >= 0) + return fb_logo_dt.rotation; + + return rotate; +} + +/* Top edge of the logo, in the coordinate space the caller works in */ +static int fb_logo_dt_top(unsigned int yres, unsigned int logo_height) +{ + struct fb_logo_dt_placement *p = &fb_logo_dt; + int top; + + if (p->centered) + top = ((int)yres - (int)logo_height) / 2; + else if (p->has_position) + top = p->y; + else + top = 0; + + return max(top + p->offset_y, 0); +} + +static void fb_logo_dt_place(struct fb_info *info, struct fb_image *image) +{ + struct fb_logo_dt_placement *p = &fb_logo_dt; + int dx; + + fb_logo_dt_read(); + + if (!p->valid) + return; + + if (p->centered) + dx = ((int)info->var.xres - (int)image->width) / 2; + else if (p->has_position) + dx = p->x; + else + dx = image->dx; + + image->dx = max(dx + p->offset_x, 0); + image->dy = fb_logo_dt_top(info->var.yres, image->height); +} + +/* + * fbcon only leaves the first @height rows of the screen alone, so a logo + * placed further down would be drawn and then immediately cleared. Grow the + * reservation to cover wherever the logo actually ends up, the same way + * fb_center_logo does. + */ +static int fb_logo_dt_reserve(unsigned int yres, unsigned int logo_height, + int height) +{ + fb_logo_dt_read(); + + if (!fb_logo_dt.valid) + return height; + + return max(height, fb_logo_dt_top(yres, logo_height) + + (int)logo_height); +} + +#else /* !CONFIG_LOGO_DT_CLUT224 */ + +static inline int fb_logo_dt_rotation(int rotate) +{ + return rotate; +} + +static inline void fb_logo_dt_place(struct fb_info *info, + struct fb_image *image) +{ +} + +static inline int fb_logo_dt_reserve(unsigned int yres, + unsigned int logo_height, int height) +{ + return height; +} + +#endif /* CONFIG_LOGO_DT_CLUT224 */ + static inline unsigned int safe_shift(unsigned int d, int n) { return n < 0 ? d >> -n : d << n; @@ -350,6 +516,9 @@ static int fb_show_logo_line(struct fb_info *info, int rotate, fb_rotate_logo(info, logo_rotate, &image, rotate); } + /* Done last, image dimensions are only final after the rotation */ + fb_logo_dt_place(info, &image); + fb_do_show_logo(info, &image, rotate, n); kfree(palette); @@ -423,6 +592,8 @@ int fb_prepare_logo(struct fb_info *info, int rotate) memset(&fb_logo, 0, sizeof(struct logo_data)); + rotate = fb_logo_dt_rotation(rotate); + if (info->flags & FBINFO_MISC_TILEBLITTING || info->fbops->owner || !fb_logo_count) return 0; @@ -483,6 +654,7 @@ int fb_prepare_logo(struct fb_info *info, int rotate) height = fb_logo.logo->height; if (fb_center_logo) height += (yres - fb_logo.logo->height) / 2; + height = fb_logo_dt_reserve(yres, fb_logo.logo->height, height); #ifdef CONFIG_FB_LOGO_EXTRA height = fb_prepare_extra_logos(info, height, yres); #endif @@ -498,6 +670,8 @@ int fb_show_logo(struct fb_info *info, int rotate) if (!fb_logo_count) return 0; + rotate = fb_logo_dt_rotation(rotate); + count = fb_logo_count < 0 ? num_online_cpus() : fb_logo_count; y = fb_show_logo_line(info, rotate, fb_logo.logo, 0, count); #ifdef CONFIG_FB_LOGO_EXTRA -- 2.39.5