Re: [PATCH net-next v2 12/14] gpio: tc956x: add TC956x/QPS615 support
Manivannan Sadhasivam <[email protected]>
| Newsgroups | org.kernel.vger.linux-gpio,org.infradead.lists.linux-arm-kernel,org.kernel.vger.bpf,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.netdev |
|---|---|
| Message-ID | <p5sfrfa5prxsuznqdjnuusgkj4vyl3aom7gorpdxb2iroxjpgp@7wyx4rceybac> |
On Tue, Jul 21, 2026 at 04:43:21PM +0200, Manivannan Sadhasivam wrote: [...] > > - Does the TC9563 chip have only *one* function on its embedded > > endpoint, supporting just one Ethernet? > > - If so, this driver will have to be modified to support > > the second embedded function and Ethernet controller. > > > > The driver assumes only one endpoint, but the binding lists 2. So the driver is > not complying with its own binding now :/ > > So technically, the driver supports 2 integrated endpoints. > I was wrong here. Driver supports only one endpoint and that's due to TC9563's hw limitation. I confused two functions defined in the binding with endpoints. - Mani -- மணிவண்ணன் சதாசிவம்