[PATCH v7 4/9] gpio: regmap: Order kernel-doc descriptions with the actual appearance

From: Andy Shevchenko <[email protected]>

Order kernel-doc descriptions with the actual appearance.

Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
---
Changes in v7:
- Add Reviewed-by tag from Michael.
- Fix indentation by replacing spaces with a tab.
---
 include/linux/gpio/regmap.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index e939709fde8d..eb3931fbbad0 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -34,10 +34,6 @@ struct regmap;
  * @ngpio_per_reg:	(Optional) Number of GPIOs per register
  * @irq_domain:		(Optional) IRQ domain if the controller is
  *			interrupt-capable
- * @reg_mask_xlate:     (Optional) Translates base address and GPIO
- *			offset to a register/bitmask pair. If not
- *			given the default gpio_regmap_simple_xlate()
- *			is used.
  * @fixed_direction_mask:
  *			(Optional) Bitmap representing the GPIO lines that
  *			make use of the @fixed_direction_output list to
@@ -48,16 +44,20 @@ struct regmap;
  *			(Optional) Bitmap representing the fixed direction of
  *			the GPIO lines. Useful when there are GPIO lines with a
  *			fixed direction mixed together in the same register.
- * @drvdata:		(Optional) Pointer to driver specific data which is
- *			not used by gpio-remap but is provided "as is" to the
- *			driver callback(s).
- * @init_valid_mask:	(Optional) Routine to initialize @valid_mask, to be used
- *			if not all GPIOs are valid.
  * @regmap_irq_chip:	(Optional) Pointer on an regmap_irq_chip structure. If
  *			set, a regmap-irq device will be created and the IRQ
  *			domain will be set accordingly.
  * @regmap_irq_line:	(Optional) The IRQ the device uses to signal interrupts.
  * @regmap_irq_flags:	(Optional) The IRQF_ flags to use for the interrupt.
+ * @reg_mask_xlate:	(Optional) Translates base address and GPIO
+ *			offset to a register/bitmask pair. If not
+ *			given the default gpio_regmap_simple_xlate()
+ *			is used.
+ * @init_valid_mask:	(Optional) Routine to initialize @valid_mask, to be used
+ *			if not all GPIOs are valid.
+ * @drvdata:		(Optional) Pointer to driver specific data which is
+ *			not used by gpio-remap but is provided "as is" to the
+ *			driver callback(s).
  *
  * The ->reg_mask_xlate translates a given base address and GPIO offset to
  * register and mask pair. The base address is one of the given register
-- 
2.43.0