Re: [PATCH v7 9/9] gpio: realtek: Add driver for Realtek DHC RTD1625 SoC

On Thu, Jul 23, 2026 at 5:43 AM Yu-Chun Lin <[email protected]> wrote:

> From: Tzuyi Chang <[email protected]>
>
> Add support for the GPIO controller found on Realtek DHC RTD1625 SoCs.
>
> Unlike the existing Realtek GPIO driver (drivers/gpio/gpio-rtd.c),
> which manages pins via shared bank registers, the RTD1625 introduces
> a per-pin register architecture. Each GPIO line now has its own
> dedicated 32-bit control register to manage configuration independently,
> including direction, output value, input value, interrupt enable, and
> debounce. Therefore, this distinct hardware design requires a separate
> driver.
>
> The RTD1625 GPIO controller has a hardware quirk where both 'assert'
> and 'de-assert' interrupts are fired simultaneously on any edge toggle.
> The driver works around this quirk to correctly handle edge interrupts.
>
> Interrupt support is optional for this device, matching the dt-bindings.
> If the interrupts property is not provided, the driver simply skips IRQ
> initialization and operates purely as a basic GPIO controller.
>
> Signed-off-by: Tzuyi Chang <[email protected]>
> Co-developed-by: Yu-Chun Lin <[email protected]>
> Signed-off-by: Yu-Chun Lin <[email protected]>

I see Mathieu have some more comments, with those fixed
I think this looks good!
Reviewed-by: Linus Walleij <[email protected]>

Yours,
Linus Walleij