[PATCH 03/10] dt-bindings: clock: add Ambarella CV75 RCT clock controller

Add the CV75 RCT clock controller binding and clock ID header.

Signed-off-by: Long Zhao <[email protected]>
---
 .../bindings/clock/ambarella,cv75-rct.yaml    | 94 +++++++++++++++++++
 .../dt-bindings/clock/ambarella,cv75-clock.h  | 17 ++++
 2 files changed, 111 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
 create mode 100644 include/dt-bindings/clock/ambarella,cv75-clock.h

diff --git a/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
new file mode 100644
index 000000000000..5ff5b6a4a0b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ambarella,cv75-rct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ambarella CV75 RCT Clock Controller
+
+maintainers:
+  - Long Zhao <[email protected]>
+
+description: |
+  The RCT (Reset and Clock Tree) block on the Ambarella CV75 SoC provides
+  PLLs, clock muxes and dividers for on-chip peripherals.
+
+  The same register region is also exposed as a syscon for other drivers
+  (e.g. pin drive-strength), hence the "syscon" compatible.
+
+  Clock indices are defined in
+  include/dt-bindings/clock/ambarella,cv75-clock.h:
+
+  - CV75_GCLK_UART0: UART0 mux/div clock
+  - CV75_GCLK_CORE: Core PLL (gclk_core)
+  - CV75_GCLK_AHB: AHB bus clock (core / 2)
+  - CV75_GCLK_APB: APB bus clock (core / 4)
+
+allOf:
+  - $ref: /schemas/mfd/syscon-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^clock-controller(@.*)?$"
+
+  compatible:
+    items:
+      - const: ambarella,cv75-rct
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Reference crystal oscillator (typically 24 MHz)
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  "#clock-cells":
+    const: 1
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ambarella,cv75-clock.h>
+
+    / {
+        compatible = "ambarella,cv75-evk", "ambarella,cv75";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        osc: oscillator {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-output-names = "osc";
+            clock-frequency = <24000000>;
+        };
+
+        rct: clock-controller@ed080000 {
+            compatible = "ambarella,cv75-rct", "syscon";
+            reg = <0xff 0xed080000 0x0 0x1000>;
+            clocks = <&osc>;
+            clock-names = "osc";
+            #clock-cells = <1>;
+
+            assigned-clocks = <&rct CV75_GCLK_UART0>;
+            assigned-clock-parents = <&osc>;
+            assigned-clock-rates = <24000000>;
+        };
+    };
diff --git a/include/dt-bindings/clock/ambarella,cv75-clock.h b/include/dt-bindings/clock/ambarella,cv75-clock.h
new file mode 100644
index 000000000000..3d3314446e75
--- /dev/null
+++ b/include/dt-bindings/clock/ambarella,cv75-clock.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2026 Ambarella, Inc.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_AMBARELLA_CV75_CLOCK_H
+#define _DT_BINDINGS_CLOCK_AMBARELLA_CV75_CLOCK_H
+
+/* Boot / bus clocks */
+#define CV75_GCLK_UART0                0
+#define CV75_GCLK_CORE         1
+#define CV75_GCLK_AHB          2
+#define CV75_GCLK_APB          3
+
+#define CV75_CLK_NUM           4
+
+#endif
--
2.34.1

NOTE: This email (including attachments) contain Ambarella Proprietary and/or Confidential Information and is intended solely for the use of the individual(s) to whom it is addressed. Any unauthorized review, use, disclosure, distribute, copy, or print is prohibited. If you are not an intended recipient, please contact the sender by reply email and destroy all copies of the original message. Thank you.