Re: [PATCH v2] gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper

Andy Shevchenko <[email protected]>
Newsgroups org.kernel.vger.linux-gpio,org.kernel.vger.linux-kernel
Organization Intel Finland Oy - BIC 0357606-4 - c/o Alberga Business Park, 6 krs, Bertel Jungin Aukio 5, 02600 Espoo
Message-ID <[email protected]> 
On Mon, Jul 27, 2026 at 01:14:40PM +0200, Bartosz Golaszewski wrote:
> On Fri, 24 Jul 2026 09:42:28 -0700, Alex Tran wrote:
> > After successfully configuring gpio pin as output, set the
> > requested initial output value via the existing gpio set
> > wrapper, so that the pin is not left at its previous level.
> 
> Applied, thanks!
> 
> [1/1] gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
>       https://git.kernel.org/brgl/c/67ff4bf723c8bd1f1b10450fa3e8f55762418104

Thanks, but see my comment.

-- 
With Best Regards,
Andy Shevchenko
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.