[PATCH v11 28/37] pinctrl: airoha: an7583: rename registers to match its an7583 names

In the an7581 case the register at 0x1FA20214 is called
RG_GPIO_2ND_I2C_MODE. The same register in the an7583 case is called
RG_SW_TOD_1PPS_MODE.

Let's rename this register to avoid potential confuse.

Signed-off-by: Mikhail Kshevetskiy <[email protected]>
---
 drivers/pinctrl/airoha/pinctrl-an7583.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/airoha/pinctrl-an7583.c b/drivers/pinctrl/airoha/pinctrl-an7583.c
index 6d195096495fe..44efccce78c55 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7583.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7583.c
@@ -8,7 +8,7 @@
 #include "airoha-common.h"
 
 /* MUX */
-#define REG_GPIO_2ND_I2C_MODE			0x0214
+#define REG_SW_TOD_1PPS_MODE			0x0214
 #define GPIO_LAN3_LED1_MODE_MASK		BIT(10)
 #define GPIO_LAN3_LED0_MODE_MASK		BIT(9)
 #define GPIO_LAN2_LED1_MODE_MASK		BIT(8)
@@ -302,7 +302,7 @@
 		.name = (gpio),						\
 		.regmap[0] = {						\
 			AIROHA_FUNC_MUX,				\
-			REG_GPIO_2ND_I2C_MODE,				\
+			REG_SW_TOD_1PPS_MODE,				\
 			(mux_val),					\
 			(mux_val),					\
 		},							\
@@ -320,7 +320,7 @@
 		.name = (gpio),						\
 		.regmap[0] = {						\
 			AIROHA_FUNC_MUX,				\
-			REG_GPIO_2ND_I2C_MODE,				\
+			REG_SW_TOD_1PPS_MODE,				\
 			(mux_val),					\
 			(mux_val),					\
 		},							\
@@ -643,7 +643,7 @@ static const struct airoha_pinctrl_func_group tod_1pps_func_group[] = {
 		.name = "pon_tod_1pps",
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
-			REG_GPIO_2ND_I2C_MODE,
+			REG_SW_TOD_1PPS_MODE,
 			PON_TOD_1PPS_MODE_MASK,
 			PON_TOD_1PPS_MODE_MASK
 		},
@@ -652,7 +652,7 @@ static const struct airoha_pinctrl_func_group tod_1pps_func_group[] = {
 		.name = "gsw_tod_1pps",
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
-			REG_GPIO_2ND_I2C_MODE,
+			REG_SW_TOD_1PPS_MODE,
 			GSW_TOD_1PPS_MODE_MASK,
 			GSW_TOD_1PPS_MODE_MASK
 		},
-- 
2.53.0