[PATCH v15 10/22] dt-bindings: media: i2c: max96712: add control-channel-port property
Dumitru Ceclan via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.linux-gpio,dev.linux.lists.linux-staging,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-media |
|---|---|
| Message-ID | <[email protected]> |
From: Dumitru Ceclan <[email protected]> Add maxim,control-channel-port property to allow platforms choose which control-channel port MAX96724 exposes to the upstream I2C host. Suggested-by: Vivekananda Dayananda <[email protected]> Signed-off-by: Dumitru Ceclan <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> --- Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml index 161d40acdd28..ab1dcd8ff8e7 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -41,6 +41,15 @@ properties: enable-gpios: true + maxim,control-channel-port: + description: + Selects which deserializer control-channel port is connected to the + upstream I2C segment when the device resets. 0 selects port 0, 1 selects + port 1. Defaults to 0 when omitted. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + i2c-alias-pool: maxItems: 4 -- 2.53.0