Re: [PATCH v5 03/21] dt-bindings: pinctrl: Add starfive,jhb100-sys0-pinctrl

Hi, Rob

> On Sun, 09 Aug 2026 23:36:32 -0700, Changhuang Liang wrote:
> > Add pinctrl bindings for StarFive JHB100 SoC System-0(sys0) pinctrl
> > controller.
> >
> > Signed-off-by: Changhuang Liang <[email protected]>
> > ---
> >  .../pinctrl/starfive,jhb100-sys0-pinctrl.yaml | 164 ++++++++++++++++++
> >  .../pinctrl/starfive,jhb100-pinctrl.h         |  17 ++
> >  2 files changed, 181 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl
> > .yaml  create mode 100644
> > include/dt-bindings/pinctrl/starfive,jhb100-pinctrl.h
> >
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.exa
> mple.dtb: pinctrl@13080000 (starfive,jhb100-sys0-pinctrl): gpio-ranges:1: [4]
> is too short
> 	from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See
> https://patchwork.kernel.org/project/devicetree/patch/20260810063650.23
> [email protected]
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above error(s),
> then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your
> schema.

Hi Rob,

Regarding this link: https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/gpio/gpio.yaml#L71

It seems that the configuration to support #gpio-cells = <3>; has not been added here yet, is that correct?

Best Regards,
Changhuang