Re: [PATCH v2] dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema

On Tue, Aug 11, 2026 at 11:10:23AM +0000, Eduard Bostina wrote:
> Convert the Texas Instruments DA850/OMAP-L138/AM18x pullup/down
> controller bindings to DT schema.
> 
> Signed-off-by: Eduard Bostina <[email protected]>
> ---
> Changes in v2:
> - Excluded the 'phandle' property from the pin group node pattern so
>   it is no longer validated as a pin configuration node. This fixes
>   the 'make dt_binding_check' failure.
> 
> Link to v1:
> https://lore.kernel.org/all/[email protected]/
> 
>  .../bindings/pinctrl/ti,da850-pupd.txt        | 55 --------------
>  .../bindings/pinctrl/ti,da850-pupd.yaml       | 74 +++++++++++++++++++
>  2 files changed, 74 insertions(+), 55 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.yaml


> diff --git a/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.yaml b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.yaml
> new file mode 100644
> index 000000000000..059da050e611
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ti,da850-pupd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments DA850/OMAP-L138/AM18x Pin Configuration
> +
> +maintainers:
> +  - Eduard Bostina <[email protected]>
> +
> +description:
> +  These SoCs have a separate controller for setting bias (internal pullup/down).
> +  Bias can only be selected for groups rather than individual pins.
> +  The controller node also acts as a container for pin group configuration nodes.
> +  The names of these groups are ignored.
> +
> +properties:
> +  compatible:
> +    const: ti,da850-pupd
> +
> +  reg:
> +    maxItems: 1
> +
> +  pinctrl-0: true
> +  pinctrl-names: true
> +
> +patternProperties:
> +  "-groups$":
> +    type: object
> +    additionalProperties: false
> +    patternProperties:
> +      "^(?!phandle$)[a-zA-Z0-9_-]+$":

Looks like '^(disable|pull-(up|down))$' would work here. Actual users 
only have 'disable'.


> +        $ref: /schemas/pinctrl/pincfg-node.yaml#
> +        properties:
> +          groups:
> +            $ref: /schemas/types.yaml#/definitions/string-array
> +            description: An array of strings containing the name of a pin group.
> +            items:
> +              pattern: "^cp([0-9]|[1-2][0-9]|3[0-1])$"
> +          bias-disable: true
> +          bias-pull-up: true
> +          bias-pull-down: true
> +        unevaluatedProperties: false

Better to use 'additionalProperties: false' here since you listed the 
only valid properties.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pinconf: pin-controller@22c00c {
> +        compatible = "ti,da850-pupd";
> +        reg = <0x22c00c 0x8>;
> +        pinctrl-0 = <&pinconf_bias_groups>;
> +        pinctrl-names = "default";
> +
> +        pinconf_bias_groups: bias-groups {
> +            pull-up {
> +                groups = "cp30", "cp31";
> +                bias-pull-up;
> +            };
> +            pull-down {
> +                groups = "cp29", "cp28";
> +                bias-pull-down;
> +            };
> +            disable {
> +                groups = "cp27", "cp26";
> +                bias-disable;
> +            };
> +        };
> +    };
> -- 
> 2.43.0
> 
>