Re: [PATCH v8 0/8] New features for the AD5686 IIO driver

On Thu, 16 Jul 2026 13:14:16 +0100
Rodrigo Alencar via B4 Relay <[email protected]> wrote:

> This is the second series of three on updating the AD5686 driver.
> 
> Initially, a big patch series was sent:
> https://lore.kernel.org/r/[email protected]
> 
> Then, the first patch series added fixes and cleanups:
> https://lore.kernel.org/linux-iio/[email protected]/
> 
> This one is introducing new features:
> - Consume optional reset and correct power supplies;
> - LDAC GPIO handling (active-low, held low when unused);
> - SPI bus sync() implementation for batching multiple transfers;
> - Triggered buffer support, leveraging LDAC and sync() to flush
>   all channel writes atomically;
> - Gain control support through the scale property.
> 
> Signed-off-by: Rodrigo Alencar <[email protected]>
Applied 2-8 but with tweaks as called out.  Pushed out as testing, please
check I didn't mess it up.

For 1, hopefully I'll get some time this week to put out a set adding
the defensive check in the i2c layer.  That API is just too weird
today for my liking.

Jonathan

> ---
> Changes in v8:
> - Add nul-check for chip_info match data.
> - Update comments/commit text and other minor changes.
> - Link to v7: https://lore.kernel.org/r/[email protected]
> 
> Changes in v7:
> - Fix return value check of i2c_transfer().
> - Amend refactoring of command/data macros.
> - Link to v6: https://lore.kernel.org/r/[email protected]
> 
> Changes in v6:
> - Refactor command/data macros in favor of FIELD_PREP()
> - Link to v5: https://lore.kernel.org/r/[email protected]
> 
> Changes in v5:
> - Create auxiliary handler for the triggered buffer.
> - Do not allow modification of double_scale in case gain_gpio is not set.
> - Link to v4: https://lore.kernel.org/r/[email protected]
> 
> Changes in v4:
> - Replace anyof+const for enum in dt-bindings. 
> - Address some sashiko's comments.
> - Use guard(mutex)() in trigger handler and other misc changes.
> - Link to v3: https://lore.kernel.org/r/[email protected]
> 
> Changes in v3:
> - Add range-double property.
> - Acquire reset control after power-up delay.
> - Include cleanup.h and use guard(mutex)() in read_raw().
> - Link to v2: https://lore.kernel.org/r/[email protected]
> 
> Changes in v2:
> - Get reset control deasserted.
> - Update entire spi_transfer struct rather than individual fields.
> - Replace udelay() for fsleep() in probe().
> - Minor changes addressing further feedback.
> - Link to v1: https://lore.kernel.org/r/[email protected]
> 
> ---
> Rodrigo Alencar (8):
>       iio: dac: ad5696: properly check i2c_transfer() return value
>       iio: dac: ad5686: missing NULL check on match data
>       iio: dac: ad5686: refactor command/data macros
>       iio: dac: ad5686: introduce sync operation
>       iio: dac: ad5686: implement new sync() op for the spi bus
>       iio: dac: ad5686: read_raw/write_raw: use guard(mutex)()
>       iio: dac: ad5686: add triggered buffer support
>       iio: dac: ad5686: add gain control support
> 
>  drivers/iio/dac/Kconfig      |   2 +
>  drivers/iio/dac/ad5686-spi.c | 142 +++++++++++++++++++++-------
>  drivers/iio/dac/ad5686.c     | 217 +++++++++++++++++++++++++++++++++++++++----
>  drivers/iio/dac/ad5686.h     |  52 ++++++++---
>  drivers/iio/dac/ad5696-i2c.c |  18 ++--
>  5 files changed, 355 insertions(+), 76 deletions(-)
> ---
> base-commit: 4c0ecdbdc0d87570f74e656e21d56bae1ab6a8f1
> change-id: 20260602-ad5686-new-features-e116c04bddb9
> 
> Best regards,