[PATCH v10 10/17] iio: frequency: ad9910: initial driver implementation

From: Rodrigo Alencar <[email protected]>

Add the core AD9910 DDS driver infrastructure with single tone mode
support. This includes SPI register access, profile management via GPIO
pins, PLL/DAC configuration from firmware properties, and single tone
frequency/phase/amplitude control through IIO attributes.

Signed-off-by: Rodrigo Alencar <[email protected]>
---
 MAINTAINERS                    |    1 +
 drivers/iio/frequency/Kconfig  |   18 +
 drivers/iio/frequency/Makefile |    1 +
 drivers/iio/frequency/ad9910.c | 1142 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1162 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 103f95307af1..816ccfaa88ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1684,6 +1684,7 @@ L:	[email protected]
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml
+F:	drivers/iio/frequency/ad9910.c
 
 ANALOG DEVICES INC MAX22007 DRIVER
 M:	Janani Sunil <[email protected]>
diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
index 90c6304c4bcd..6033f9155b4f 100644
--- a/drivers/iio/frequency/Kconfig
+++ b/drivers/iio/frequency/Kconfig
@@ -23,6 +23,24 @@ config AD9523
 
 endmenu
 
+menu "Direct Digital Synthesis"
+
+config AD9910
+	tristate "Analog Devices AD9910 Direct Digital Synthesizer"
+	depends on SPI
+	depends on GPIOLIB
+	help
+	  Say yes here to build support for Analog Devices AD9910
+	  1 GSPS, 14-Bit DDS with integrated DAC.
+
+	  Supports single tone mode with 8 configurable profiles
+	  and digital ramp generation.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad9910.
+
+endmenu
+
 #
 # Phase-Locked Loop (PLL) frequency synthesizers
 #
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index 53b4d01414d8..e3b1d36ed620 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -5,6 +5,7 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD9523) += ad9523.o
+obj-$(CONFIG_AD9910) += ad9910.o
 obj-$(CONFIG_ADF41513) += adf41513.o
 obj-$(CONFIG_ADF4350) += adf4350.o
 obj-$(CONFIG_ADF4371) += adf4371.o
diff --git a/drivers/iio/frequency/ad9910.c b/drivers/iio/frequency/ad9910.c
new file mode 100644
index 000000000000..b41b011af281
--- /dev/null
+++ b/drivers/iio/frequency/ad9910.c
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AD9910 SPI DDS (Direct Digital Synthesizer) driver
+ *
+ * Copyright 2026 Analog Devices Inc.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device-id/of.h>
+#include <linux/device-id/spi.h>
+#include <linux/device/devres.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/log2.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/units.h>
+#include <linux/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Register addresses */
+#define AD9910_REG_CFR1			0x00
+#define AD9910_REG_CFR2			0x01
+#define AD9910_REG_CFR3			0x02
+#define AD9910_REG_AUX_DAC		0x03
+#define AD9910_REG_IO_UPDATE_RATE	0x04
+#define AD9910_REG_FTW			0x07
+#define AD9910_REG_POW			0x08
+#define AD9910_REG_ASF			0x09
+#define AD9910_REG_MULTICHIP_SYNC	0x0A
+#define AD9910_REG_DRG_LIMIT		0x0B
+#define AD9910_REG_DRG_STEP		0x0C
+#define AD9910_REG_DRG_RATE		0x0D
+#define AD9910_REG_PROFILE0		0x0E
+#define AD9910_REG_PROFILE1		0x0F
+#define AD9910_REG_PROFILE2		0x10
+#define AD9910_REG_PROFILE3		0x11
+#define AD9910_REG_PROFILE4		0x12
+#define AD9910_REG_PROFILE5		0x13
+#define AD9910_REG_PROFILE6		0x14
+#define AD9910_REG_PROFILE7		0x15
+#define AD9910_REG_RAM			0x16
+
+#define AD9910_REG_NUM_CACHED		0x16
+#define AD9910_REG_PROFILE(x)		(AD9910_REG_PROFILE0 + (x))
+
+/* CFR1 bit definitions */
+#define AD9910_CFR1_RAM_ENABLE_MSK		BIT(31)
+#define AD9910_CFR1_RAM_PLAYBACK_DEST_MSK	GENMASK(30, 29)
+#define AD9910_CFR1_OSK_MANUAL_EXT_CTL_MSK	BIT(23)
+#define AD9910_CFR1_INV_SINC_EN_MSK		BIT(22)
+#define AD9910_CFR1_INT_PROFILE_CTL_MSK		GENMASK(20, 17)
+#define AD9910_CFR1_SELECT_SINE_MSK		BIT(16)
+#define AD9910_CFR1_LOAD_LRR_IO_UPDATE_MSK	BIT(15)
+#define AD9910_CFR1_AUTOCLR_DIG_RAMP_ACCUM_MSK	BIT(14)
+#define AD9910_CFR1_AUTOCLR_PHASE_ACCUM_MSK	BIT(13)
+#define AD9910_CFR1_CLEAR_DIG_RAMP_ACCUM_MSK	BIT(12)
+#define AD9910_CFR1_CLEAR_PHASE_ACCUM_MSK	BIT(11)
+#define AD9910_CFR1_LOAD_ARR_IO_UPDATE_MSK	BIT(10)
+#define AD9910_CFR1_OSK_ENABLE_MSK		BIT(9)
+#define AD9910_CFR1_SELECT_AUTO_OSK_MSK		BIT(8)
+#define AD9910_CFR1_DIGITAL_POWER_DOWN_MSK	BIT(7)
+#define AD9910_CFR1_DAC_POWER_DOWN_MSK		BIT(6)
+#define AD9910_CFR1_REFCLK_INPUT_POWER_DOWN_MSK	BIT(5)
+#define AD9910_CFR1_AUX_DAC_POWER_DOWN_MSK	BIT(4)
+#define AD9910_CFR1_EXT_POWER_DOWN_CTL_MSK	BIT(3)
+#define AD9910_CFR1_SDIO_INPUT_ONLY_MSK		BIT(1)
+#define AD9910_CFR1_LSB_FIRST_MSK		BIT(0)
+
+/* DIGITAL and REFCLK_INPUT powerdown bits are effective without I/O update */
+#define AD9910_CFR1_SW0_POWER_DOWN_MSK	(AD9910_CFR1_DIGITAL_POWER_DOWN_MSK | \
+					 AD9910_CFR1_REFCLK_INPUT_POWER_DOWN_MSK)
+/* DAC and AUX_DAC powerdown require I/O update */
+#define AD9910_CFR1_SW1_POWER_DOWN_MSK	(AD9910_CFR1_DAC_POWER_DOWN_MSK | \
+					 AD9910_CFR1_AUX_DAC_POWER_DOWN_MSK)
+
+#define AD9910_CFR1_SW_POWER_DOWN_MSK	(AD9910_CFR1_SW0_POWER_DOWN_MSK | \
+					 AD9910_CFR1_SW1_POWER_DOWN_MSK)
+
+/* CFR2 bit definitions */
+#define AD9910_CFR2_AMP_SCALE_SINGLE_TONE_MSK	BIT(24)
+#define AD9910_CFR2_INTERNAL_IO_UPDATE_MSK	BIT(23)
+#define AD9910_CFR2_SYNC_CLK_EN_MSK		BIT(22)
+#define AD9910_CFR2_DRG_DEST_MSK		GENMASK(21, 20)
+#define AD9910_CFR2_DRG_ENABLE_MSK		BIT(19)
+#define AD9910_CFR2_DRG_NO_DWELL_HIGH_MSK	BIT(18)
+#define AD9910_CFR2_DRG_NO_DWELL_LOW_MSK	BIT(17)
+#define AD9910_CFR2_DRG_NO_DWELL_MSK		GENMASK(18, 17)
+#define AD9910_CFR2_READ_EFFECTIVE_FTW_MSK	BIT(16)
+#define AD9910_CFR2_IO_UPDATE_RATE_CTL_MSK	GENMASK(15, 14)
+#define AD9910_CFR2_PDCLK_ENABLE_MSK		BIT(11)
+#define AD9910_CFR2_PDCLK_INVERT_MSK		BIT(10)
+#define AD9910_CFR2_TXENABLE_INVERT_MSK		BIT(9)
+#define AD9910_CFR2_MATCHED_LATENCY_EN_MSK	BIT(7)
+#define AD9910_CFR2_DATA_ASM_HOLD_LAST_MSK	BIT(6)
+#define AD9910_CFR2_SYNC_TIMING_VAL_DISABLE_MSK	BIT(5)
+#define AD9910_CFR2_PARALLEL_DATA_PORT_EN_MSK	BIT(4)
+#define AD9910_CFR2_FM_GAIN_MSK			GENMASK(3, 0)
+
+/* CFR3 bit definitions */
+#define AD9910_CFR3_OPEN_MSK			(BIT(27) | GENMASK(18, 16))
+#define AD9910_CFR3_DRV0_MSK			GENMASK(29, 28)
+#define AD9910_CFR3_VCO_SEL_MSK			GENMASK(26, 24)
+#define AD9910_CFR3_ICP_MSK			GENMASK(21, 19)
+#define AD9910_CFR3_REFCLK_DIV_BYPASS_MSK	BIT(15)
+#define AD9910_CFR3_REFCLK_DIV_RESETB_MSK	BIT(14)
+#define AD9910_CFR3_PFD_RESET_MSK		BIT(10)
+#define AD9910_CFR3_PLL_EN_MSK			BIT(8)
+#define AD9910_CFR3_N_MSK			GENMASK(7, 1)
+
+/* Auxiliary DAC Control Register Bits */
+#define AD9910_AUX_DAC_FSC_MSK			GENMASK(7, 0)
+
+/* ASF Register Bits */
+#define AD9910_ASF_RAMP_RATE_MSK		GENMASK(31, 16)
+#define AD9910_ASF_SCALE_FACTOR_MSK		GENMASK(15, 2)
+#define AD9910_ASF_STEP_SIZE_MSK		GENMASK(1, 0)
+
+/* Multichip Sync Register Bits */
+#define AD9910_MC_SYNC_VALIDATION_DELAY_MSK	GENMASK(31, 28)
+#define AD9910_MC_SYNC_RECEIVER_ENABLE_MSK	BIT(27)
+#define AD9910_MC_SYNC_GENERATOR_ENABLE_MSK	BIT(26)
+#define AD9910_MC_SYNC_GENERATOR_POLARITY_MSK	BIT(25)
+#define AD9910_MC_SYNC_STATE_PRESET_MSK		GENMASK(23, 18)
+#define AD9910_MC_SYNC_OUTPUT_DELAY_MSK		GENMASK(15, 11)
+#define AD9910_MC_SYNC_INPUT_DELAY_MSK		GENMASK(7, 3)
+
+/* Profile Register Format (Single Tone Mode) */
+#define AD9910_PROFILE_ST_ASF_MSK		GENMASK_ULL(61, 48)
+#define AD9910_PROFILE_ST_POW_MSK		GENMASK_ULL(47, 32)
+#define AD9910_PROFILE_ST_FTW_MSK		GENMASK_ULL(31, 0)
+
+/* Device constants */
+#define AD9910_PI_NANORAD		3141592653UL
+
+#define AD9910_MAX_SYSCLK_HZ		(1000 * HZ_PER_MHZ)
+#define AD9910_MAX_PHASE_MICRORAD	(AD9910_PI_NANORAD / 500)
+
+#define AD9910_ASF_MAX			FIELD_MAX(AD9910_PROFILE_ST_ASF_MSK)
+#define AD9910_POW_MAX			FIELD_MAX(AD9910_PROFILE_ST_POW_MSK)
+#define AD9910_NUM_PROFILES		8
+
+/* PLL constants */
+#define AD9910_PLL_MIN_N		12
+#define AD9910_PLL_MAX_N		127
+
+#define AD9910_PLL_IN_MIN_FREQ_HZ	(3307 * HZ_PER_KHZ)
+#define AD9910_PLL_IN_MAX_FREQ_HZ	(60 * HZ_PER_MHZ)
+
+#define AD9910_PLL_OUT_MIN_FREQ_HZ	(420 * HZ_PER_MHZ)
+#define AD9910_PLL_OUT_MAX_FREQ_HZ	AD9910_MAX_SYSCLK_HZ
+
+#define AD9910_VCO0_RANGE_AUTO_MAX_HZ	(457 * HZ_PER_MHZ)
+#define AD9910_VCO1_RANGE_AUTO_MAX_HZ	(530 * HZ_PER_MHZ)
+#define AD9910_VCO2_RANGE_AUTO_MAX_HZ	(632 * HZ_PER_MHZ)
+#define AD9910_VCO3_RANGE_AUTO_MAX_HZ	(775 * HZ_PER_MHZ)
+#define AD9910_VCO4_RANGE_AUTO_MAX_HZ	(897 * HZ_PER_MHZ)
+#define AD9910_VCO_RANGE_NUM		6
+
+#define AD9910_ICP_MIN_uA		212
+#define AD9910_ICP_MAX_uA		387
+#define AD9910_ICP_STEP_uA		25
+
+#define AD9910_DAC_IOUT_MAX_uA		31590
+#define AD9910_DAC_IOUT_DEFAULT_uA	20070
+#define AD9910_DAC_IOUT_MIN_uA		8640
+
+/* altcurrent ABI is in mA */
+#define AD9910_NANO_MILLIAMP_PER_MICROAMP	1000000UL
+
+#define AD9910_REFDIV2_MIN_FREQ_HZ	(25 * HZ_PER_MHZ)
+#define AD9910_REFDIV2_MAX_FREQ_HZ	(1900 * HZ_PER_MHZ)
+
+#define AD9910_WAKEUP_DELAY_us		1000	/* 1ms: datasheet Table 1 */
+#define AD9910_RESET_DELAY_us		1	/* 5 sysclk cycles: < 1us */
+
+#define AD9910_SPI_DATA_IDX		1
+#define AD9910_SPI_DATA_LEN_MAX		sizeof(__be64)
+#define AD9910_SPI_MESSAGE_LEN_MAX	(AD9910_SPI_DATA_IDX + AD9910_SPI_DATA_LEN_MAX)
+#define AD9910_SPI_READ_MSK		BIT(7)
+#define AD9910_SPI_ADDR_MSK		GENMASK(4, 0)
+
+/**
+ * enum ad9910_channel - AD9910 channel identifiers in priority order
+ *
+ * @AD9910_CHANNEL_PHY: Physical output channel
+ * @AD9910_CHANNEL_PROFILE_0: Profile 0 output channel
+ * @AD9910_CHANNEL_PROFILE_1: Profile 1 output channel
+ * @AD9910_CHANNEL_PROFILE_2: Profile 2 output channel
+ * @AD9910_CHANNEL_PROFILE_3: Profile 3 output channel
+ * @AD9910_CHANNEL_PROFILE_4: Profile 4 output channel
+ * @AD9910_CHANNEL_PROFILE_5: Profile 5 output channel
+ * @AD9910_CHANNEL_PROFILE_6: Profile 6 output channel
+ * @AD9910_CHANNEL_PROFILE_7: Profile 7 output channel
+ */
+enum ad9910_channel {
+	AD9910_CHANNEL_PHY = 100,
+	AD9910_CHANNEL_PROFILE_0 = 110,
+	AD9910_CHANNEL_PROFILE_1 = 111,
+	AD9910_CHANNEL_PROFILE_2 = 112,
+	AD9910_CHANNEL_PROFILE_3 = 113,
+	AD9910_CHANNEL_PROFILE_4 = 114,
+	AD9910_CHANNEL_PROFILE_5 = 115,
+	AD9910_CHANNEL_PROFILE_6 = 116,
+	AD9910_CHANNEL_PROFILE_7 = 117,
+};
+
+enum {
+	AD9910_CHAN_IDX_PHY,
+	AD9910_CHAN_IDX_PROFILE_0,
+	AD9910_CHAN_IDX_PROFILE_1,
+	AD9910_CHAN_IDX_PROFILE_2,
+	AD9910_CHAN_IDX_PROFILE_3,
+	AD9910_CHAN_IDX_PROFILE_4,
+	AD9910_CHAN_IDX_PROFILE_5,
+	AD9910_CHAN_IDX_PROFILE_6,
+	AD9910_CHAN_IDX_PROFILE_7,
+};
+
+enum {
+	AD9910_POWERDOWN,
+};
+
+struct ad9910_data {
+	u32 sysclk_freq_hz;
+	u32 output_current_uA;
+
+	u16 pll_charge_pump_current;
+	u8 refclk_out_drv;
+	bool pll_enabled;
+};
+
+union ad9910_reg {
+	u64 val64;
+	u32 val32;
+	u16 val16;
+};
+
+struct ad9910_state {
+	struct spi_device *spi;
+	struct clk *refclk;
+
+	struct gpio_desc *gpio_pwdown;
+	struct gpio_desc *gpio_update;
+	struct gpio_descs *gpio_profile;
+
+	/* cached registers */
+	union ad9910_reg reg[AD9910_REG_NUM_CACHED];
+
+	/* Lock for accessing device registers and state variables */
+	struct mutex lock;
+
+	struct ad9910_data data;
+	u8 profile;
+
+	/*
+	 * RAM loading requires a reasonable amount of bytes, at the same time
+	 * DMA capable SPI drivers requires the transfer buffers to live in
+	 * their own cache lines.
+	 */
+	u8 tx_buf[AD9910_SPI_MESSAGE_LEN_MAX] __aligned(IIO_DMA_MINALIGN);
+};
+
+/**
+ * ad9910_rational_scale() - Perform scaling of input given a reference.
+ * @input: The input value to be scaled.
+ * @scale: The numerator of the scaling factor.
+ * @reference: The denominator of the scaling factor.
+ *
+ * Closest rounding with mul_u64_add_u64_div_u64
+ *
+ * Return: The scaled value.
+ */
+static inline u64 ad9910_rational_scale(u64 input, u64 scale, u64 reference)
+{
+	return mul_u64_add_u64_div_u64(input, scale, reference >> 1, reference);
+}
+
+static int ad9910_io_update(struct ad9910_state *st)
+{
+	if (st->gpio_update) {
+		gpiod_set_value_cansleep(st->gpio_update, 1);
+		fsleep(1);
+		gpiod_set_value_cansleep(st->gpio_update, 0);
+	}
+
+	return 0;
+}
+
+static inline int ad9910_spi_read(struct ad9910_state *st, u8 reg, void *data,
+				  size_t len)
+{
+	u8 inst = AD9910_SPI_READ_MSK | FIELD_PREP(AD9910_SPI_ADDR_MSK, reg);
+
+	return spi_write_then_read(st->spi, &inst, sizeof(inst), data, len);
+}
+
+static inline int ad9910_spi_write(struct ad9910_state *st, u8 reg, size_t len,
+				   bool update)
+{
+	int ret;
+
+	st->tx_buf[0] = FIELD_PREP(AD9910_SPI_ADDR_MSK, reg);
+	ret = spi_write(st->spi, st->tx_buf, AD9910_SPI_DATA_IDX + len);
+	if (ret)
+		return ret;
+
+	if (update)
+		return ad9910_io_update(st);
+
+	return 0;
+}
+
+#define AD9910_REG_READ_FN(nb)						\
+static int ad9910_reg##nb##_read(struct ad9910_state *st, u8 reg,	\
+				 u##nb * data)				\
+{									\
+	__be##nb be_data;						\
+	int ret;							\
+									\
+	ret = ad9910_spi_read(st, reg, &be_data, sizeof(be_data));	\
+	if (ret)							\
+		return ret;						\
+									\
+	*data = be##nb##_to_cpu(be_data);				\
+	return ret;							\
+}
+
+AD9910_REG_READ_FN(16)
+AD9910_REG_READ_FN(32)
+AD9910_REG_READ_FN(64)
+
+#define AD9910_REG_WRITE_FN(nb)						\
+static int ad9910_reg##nb##_write(struct ad9910_state *st, u8 reg,	\
+				  u##nb data, bool update)		\
+{									\
+	int ret;							\
+									\
+	put_unaligned_be##nb(data, &st->tx_buf[AD9910_SPI_DATA_IDX]);	\
+	ret = ad9910_spi_write(st, reg, sizeof(data), update);		\
+	if (ret)							\
+		return ret;						\
+									\
+	st->reg[reg].val##nb = data;					\
+	return ret;							\
+}
+
+AD9910_REG_WRITE_FN(16)
+AD9910_REG_WRITE_FN(32)
+AD9910_REG_WRITE_FN(64)
+
+#define AD9910_REG_UPDATE_FN(nb)					\
+static int ad9910_reg##nb##_update(struct ad9910_state *st,		\
+				   u8 reg, u##nb mask,			\
+				   u##nb data, bool update)		\
+{									\
+	u##nb reg_val = (st->reg[reg].val##nb & ~mask) | (data & mask);	\
+									\
+	if (reg_val == st->reg[reg].val##nb && !update)			\
+		return 0;						\
+									\
+	return ad9910_reg##nb##_write(st, reg, reg_val, update);	\
+}
+
+AD9910_REG_UPDATE_FN(16)
+AD9910_REG_UPDATE_FN(32)
+AD9910_REG_UPDATE_FN(64)
+
+static int ad9910_set_dac_current(struct ad9910_state *st, u32 val_uA,
+				  bool update)
+{
+	u32 code;
+
+	/* FSC = (86.4 / Rset) * (1 + CODE/96) where Rset = 10k ohms */
+	val_uA = clamp(val_uA, AD9910_DAC_IOUT_MIN_uA, AD9910_DAC_IOUT_MAX_uA);
+	code = DIV_ROUND_CLOSEST(val_uA - AD9910_DAC_IOUT_MIN_uA, 90);
+	st->data.output_current_uA = AD9910_DAC_IOUT_MIN_uA + code * 90;
+
+	return ad9910_reg32_write(st, AD9910_REG_AUX_DAC, code, update);
+}
+
+static int ad9910_set_sysclk_freq(struct ad9910_state *st, u32 freq_hz,
+				  bool update)
+{
+	struct device *dev = &st->spi->dev;
+	unsigned long refclk_freq_hz;
+	u32 sysclk_freq_hz;
+	u32 tmp32, vco_sel;
+	int ret;
+
+	if (!freq_hz || freq_hz > AD9910_MAX_SYSCLK_HZ)
+		return -EINVAL;
+
+	refclk_freq_hz = clk_get_rate(st->refclk);
+	if (st->data.pll_enabled) {
+		if (refclk_freq_hz < AD9910_PLL_IN_MIN_FREQ_HZ ||
+		    refclk_freq_hz > AD9910_PLL_IN_MAX_FREQ_HZ) {
+			dev_err(dev,
+				"REF_CLK freq %lu Hz is out of PLL input range\n",
+				refclk_freq_hz);
+			return -ERANGE;
+		}
+
+		tmp32 = DIV_ROUND_CLOSEST(freq_hz, refclk_freq_hz);
+		tmp32 = clamp(tmp32, DIV_ROUND_UP(AD9910_PLL_OUT_MIN_FREQ_HZ, refclk_freq_hz),
+			      AD9910_PLL_OUT_MAX_FREQ_HZ / refclk_freq_hz);
+		tmp32 = clamp(tmp32, AD9910_PLL_MIN_N, AD9910_PLL_MAX_N);
+		sysclk_freq_hz = refclk_freq_hz * tmp32;
+
+		if (sysclk_freq_hz <= AD9910_VCO0_RANGE_AUTO_MAX_HZ)
+			vco_sel = 0;
+		else if (sysclk_freq_hz <= AD9910_VCO1_RANGE_AUTO_MAX_HZ)
+			vco_sel = 1;
+		else if (sysclk_freq_hz <= AD9910_VCO2_RANGE_AUTO_MAX_HZ)
+			vco_sel = 2;
+		else if (sysclk_freq_hz <= AD9910_VCO3_RANGE_AUTO_MAX_HZ)
+			vco_sel = 3;
+		else if (sysclk_freq_hz <= AD9910_VCO4_RANGE_AUTO_MAX_HZ)
+			vco_sel = 4;
+		else
+			vco_sel = 5;
+
+		ret = ad9910_reg32_update(st, AD9910_REG_CFR3,
+					  AD9910_CFR3_N_MSK | AD9910_CFR3_VCO_SEL_MSK,
+					  FIELD_PREP(AD9910_CFR3_N_MSK, tmp32) |
+					  FIELD_PREP(AD9910_CFR3_VCO_SEL_MSK, vco_sel),
+					  update);
+		if (ret)
+			return ret;
+	} else {
+		if (refclk_freq_hz < AD9910_REFDIV2_MIN_FREQ_HZ ||
+		    refclk_freq_hz > AD9910_REFDIV2_MAX_FREQ_HZ) {
+			dev_err(dev,
+				"REF_CLK freq %lu Hz is out of divider range\n",
+				refclk_freq_hz);
+			return -ERANGE;
+		}
+
+		tmp32 = DIV_ROUND_CLOSEST(refclk_freq_hz, freq_hz);
+		tmp32 = clamp(tmp32, 1U, 2U);
+		sysclk_freq_hz = refclk_freq_hz / tmp32;
+		tmp32 = AD9910_CFR3_VCO_SEL_MSK |
+			FIELD_PREP(AD9910_CFR3_REFCLK_DIV_BYPASS_MSK, tmp32 % 2);
+		ret = ad9910_reg32_update(st, AD9910_REG_CFR3,
+					  AD9910_CFR3_VCO_SEL_MSK |
+					  AD9910_CFR3_REFCLK_DIV_BYPASS_MSK,
+					  tmp32, update);
+		if (ret)
+			return ret;
+	}
+
+	st->data.sysclk_freq_hz = sysclk_freq_hz;
+
+	return 0;
+}
+
+static int ad9910_profile_set(struct ad9910_state *st, u8 profile)
+{
+	DECLARE_BITMAP(values, BITS_PER_TYPE(profile));
+
+	st->profile = profile;
+	values[0] = profile;
+	gpiod_multi_set_value_cansleep(st->gpio_profile, values);
+
+	return 0;
+}
+
+static inline bool ad9910_sw_powerdown_get(struct ad9910_state *st)
+{
+	return FIELD_GET(AD9910_CFR1_SW_POWER_DOWN_MSK,
+			 st->reg[AD9910_REG_CFR1].val32) ? true : false;
+}
+
+static int ad9910_sw_powerdown_set(struct ad9910_state *st, bool enable)
+{
+	int ret;
+
+	if (ad9910_sw_powerdown_get(st) == enable)
+		return 0;
+
+	/*
+	 * When powering down, the DAC and AUX_DAC (SW1) must be powered down
+	 * first, as they require an I/O update to take effect. The opposite is
+	 * true when powering up, the DAC and AUX_DAC must be powered up last,
+	 * i.e., after the DIGITAL and REFCLK_INPUT (SW0) power up.
+	 */
+	if (enable) {
+		ret = ad9910_reg32_update(st, AD9910_REG_CFR1,
+					  AD9910_CFR1_SW1_POWER_DOWN_MSK,
+					  AD9910_CFR1_SW1_POWER_DOWN_MSK,
+					  true);
+		if (ret)
+			return ret;
+
+		return ad9910_reg32_update(st, AD9910_REG_CFR1,
+					   AD9910_CFR1_SW0_POWER_DOWN_MSK,
+					   AD9910_CFR1_SW0_POWER_DOWN_MSK,
+					   false);
+	}
+
+	ret = ad9910_reg32_update(st, AD9910_REG_CFR1,
+				  AD9910_CFR1_SW0_POWER_DOWN_MSK, 0, false);
+	if (ret)
+		return ret;
+
+	return ad9910_reg32_update(st, AD9910_REG_CFR1,
+				   AD9910_CFR1_SW1_POWER_DOWN_MSK, 0, true);
+}
+
+static ssize_t ad9910_ext_info_read(struct iio_dev *indio_dev,
+				    uintptr_t private,
+				    const struct iio_chan_spec *chan,
+				    char *buf)
+{
+	struct ad9910_state *st = iio_priv(indio_dev);
+	int val;
+
+	guard(mutex)(&st->lock);
+
+	switch (private) {
+	case AD9910_POWERDOWN:
+		val = ad9910_sw_powerdown_get(st);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return iio_format_value(buf, IIO_VAL_INT, 1, &val);
+}
+
+static ssize_t ad9910_ext_info_write(struct iio_dev *indio_dev,
+				     uintptr_t private,
+				     const struct iio_chan_spec *chan,
+				     const char *buf, size_t len)
+{
+	struct ad9910_state *st = iio_priv(indio_dev);
+	u32 val32;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &val32);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	switch (private) {
+	case AD9910_POWERDOWN:
+		ret = ad9910_sw_powerdown_set(st, val32 ? true : false);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info ad9910_phy_ext_info[] = {
+	{
+		.name = "powerdown",
+		.read = ad9910_ext_info_read,
+		.write = ad9910_ext_info_write,
+		.private = AD9910_POWERDOWN,
+		.shared = IIO_SEPARATE,
+	},
+	{ }
+};
+
+#define AD9910_PROFILE_CHAN(idx) {				\
+	.type = IIO_ALTCURRENT,					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.channel = AD9910_CHANNEL_PROFILE_ ## idx,		\
+	.address = AD9910_CHAN_IDX_PROFILE_ ## idx,		\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_ENABLE) |	\
+			      BIT(IIO_CHAN_INFO_FREQUENCY) |	\
+			      BIT(IIO_CHAN_INFO_PHASE) |	\
+			      BIT(IIO_CHAN_INFO_RAW),		\
+	.parent = &ad9910_channels[AD9910_CHAN_IDX_PHY],	\
+}
+
+static const struct iio_chan_spec ad9910_channels[] = {
+	[AD9910_CHAN_IDX_PHY] = {
+		.type = IIO_ALTCURRENT,
+		.indexed = 1,
+		.output = 1,
+		.channel = AD9910_CHANNEL_PHY,
+		.address = AD9910_CHAN_IDX_PHY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.ext_info = ad9910_phy_ext_info,
+	},
+	[AD9910_CHAN_IDX_PROFILE_0] = AD9910_PROFILE_CHAN(0),
+	[AD9910_CHAN_IDX_PROFILE_1] = AD9910_PROFILE_CHAN(1),
+	[AD9910_CHAN_IDX_PROFILE_2] = AD9910_PROFILE_CHAN(2),
+	[AD9910_CHAN_IDX_PROFILE_3] = AD9910_PROFILE_CHAN(3),
+	[AD9910_CHAN_IDX_PROFILE_4] = AD9910_PROFILE_CHAN(4),
+	[AD9910_CHAN_IDX_PROFILE_5] = AD9910_PROFILE_CHAN(5),
+	[AD9910_CHAN_IDX_PROFILE_6] = AD9910_PROFILE_CHAN(6),
+	[AD9910_CHAN_IDX_PROFILE_7] = AD9910_PROFILE_CHAN(7),
+};
+
+static int ad9910_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad9910_state *st = iio_priv(indio_dev);
+	u64 tmp64;
+	u32 tmp32;
+
+	guard(mutex)(&st->lock);
+
+	switch (info) {
+	case IIO_CHAN_INFO_ENABLE:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			if (ad9910_sw_powerdown_get(st)) {
+				*val = 0;
+			} else {
+				tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+				*val = (tmp32 == st->profile);
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_FREQUENCY:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			tmp64 = FIELD_GET(AD9910_PROFILE_ST_FTW_MSK,
+					  st->reg[AD9910_REG_PROFILE(tmp32)].val64);
+			break;
+		default:
+			return -EINVAL;
+		}
+		tmp64 *= st->data.sysclk_freq_hz;
+		*val = tmp64 >> 32;
+		*val2 = ((tmp64 & GENMASK_ULL(31, 0)) * MICRO) >> 32;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_PHASE:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			tmp64 = FIELD_GET(AD9910_PROFILE_ST_POW_MSK,
+					  st->reg[AD9910_REG_PROFILE(tmp32)].val64);
+			break;
+		default:
+			return -EINVAL;
+		}
+		tmp32 = (tmp64 * AD9910_MAX_PHASE_MICRORAD) >> 16;
+		*val = tmp32 / MICRO;
+		*val2 = tmp32 % MICRO;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			*val = FIELD_GET(AD9910_PROFILE_ST_ASF_MSK,
+					 st->reg[AD9910_REG_PROFILE(tmp32)].val64);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PHY:
+			*val = st->data.sysclk_freq_hz;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->address) {
+		case AD9910_CHAN_IDX_PHY:
+			tmp64 = (u64)st->data.output_current_uA *
+				AD9910_NANO_MILLIAMP_PER_MICROAMP;
+			*val = 0;
+			*val2 = tmp64 >> 14;
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad9910_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad9910_state *st = iio_priv(indio_dev);
+	u64 tmp64;
+	u32 tmp32;
+	int ret;
+
+	guard(mutex)(&st->lock);
+
+	switch (info) {
+	case IIO_CHAN_INFO_ENABLE:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			if (!val) {
+				if (tmp32 != st->profile)
+					return 0; /* nothing to do */
+
+				return ad9910_sw_powerdown_set(st, true);
+			}
+
+			ret = ad9910_sw_powerdown_set(st, false);
+			if (ret)
+				return ret;
+
+			return ad9910_profile_set(st, tmp32);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_FREQUENCY:
+		if (val < 0 || val2 < 0 || val >= st->data.sysclk_freq_hz / 2)
+			return -EINVAL;
+
+		tmp64 = ad9910_rational_scale((u64)val * MICRO + val2, BIT_ULL(32),
+					      (u64)MICRO * st->data.sysclk_freq_hz);
+		tmp64 = min_t(u64, tmp64, U32_MAX);
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			tmp64 = FIELD_PREP(AD9910_PROFILE_ST_FTW_MSK, tmp64);
+			return ad9910_reg64_update(st, AD9910_REG_PROFILE(tmp32),
+						   AD9910_PROFILE_ST_FTW_MSK,
+						   tmp64, true);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_PHASE:
+		if (val < 0 || val2 < 0)
+			return -EINVAL;
+
+		tmp64 = (u64)val * MICRO + val2;
+		if (tmp64 >= AD9910_MAX_PHASE_MICRORAD)
+			return -EINVAL;
+
+		tmp64 = DIV_U64_ROUND_CLOSEST(tmp64 << 16, AD9910_MAX_PHASE_MICRORAD);
+		tmp64 = min(tmp64, AD9910_POW_MAX);
+
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			tmp64 = FIELD_PREP(AD9910_PROFILE_ST_POW_MSK, tmp64);
+			return ad9910_reg64_update(st, AD9910_REG_PROFILE(tmp32),
+						   AD9910_PROFILE_ST_POW_MSK,
+						   tmp64, true);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			if (val < 0)
+				return -EINVAL;
+
+			tmp32 = chan->channel - AD9910_CHANNEL_PROFILE_0;
+			tmp64 = FIELD_PREP(AD9910_PROFILE_ST_ASF_MSK,
+					   min_t(u64, val, AD9910_ASF_MAX));
+			return ad9910_reg64_update(st, AD9910_REG_PROFILE(tmp32),
+						   AD9910_PROFILE_ST_ASF_MSK,
+						   tmp64, true);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return ad9910_set_sysclk_freq(st, val, true);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->address) {
+		case AD9910_CHAN_IDX_PHY:
+			if (val != 0 || val2 < 0)
+				return -EINVAL;
+
+			tmp32 = DIV_U64_ROUND_CLOSEST((u64)val2 << 14,
+						      AD9910_NANO_MILLIAMP_PER_MICROAMP);
+			return ad9910_set_dac_current(st, tmp32, true);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad9910_write_raw_get_fmt(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_ENABLE:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_FREQUENCY:
+	case IIO_CHAN_INFO_PHASE:
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->channel) {
+		case AD9910_CHANNEL_PROFILE_0 ... AD9910_CHANNEL_PROFILE_7:
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad9910_debugfs_reg_access(struct iio_dev *indio_dev,
+				     unsigned int reg, u64 writeval,
+				     u64 *readval)
+{
+	struct ad9910_state *st = iio_priv(indio_dev);
+	union ad9910_reg tmp;
+	int ret;
+
+	if (reg >= AD9910_REG_RAM)
+		return -EINVAL;
+
+	guard(mutex)(&st->lock);
+
+	switch (reg) {
+	case AD9910_REG_DRG_LIMIT:
+	case AD9910_REG_DRG_STEP:
+	case AD9910_REG_PROFILE0 ... AD9910_REG_PROFILE7:
+		if (!readval)
+			return ad9910_reg64_write(st, reg, writeval, true);
+
+		ret = ad9910_reg64_read(st, reg, &tmp.val64);
+		if (ret)
+			return ret;
+		*readval = tmp.val64;
+		return 0;
+	case AD9910_REG_POW:
+		if (!readval)
+			return ad9910_reg16_write(st, reg, writeval, true);
+
+		ret = ad9910_reg16_read(st, reg, &tmp.val16);
+		if (ret)
+			return ret;
+		*readval = tmp.val16;
+		return 0;
+	default:
+		if (!readval)
+			return ad9910_reg32_write(st, reg, writeval, true);
+
+		ret = ad9910_reg32_read(st, reg, &tmp.val32);
+		if (ret)
+			return ret;
+		*readval = tmp.val32;
+		return 0;
+	}
+}
+
+static const char * const ad9910_channel_str[] = {
+	[AD9910_CHAN_IDX_PHY] = "phy",
+	[AD9910_CHAN_IDX_PROFILE_0] = "profile0",
+	[AD9910_CHAN_IDX_PROFILE_1] = "profile1",
+	[AD9910_CHAN_IDX_PROFILE_2] = "profile2",
+	[AD9910_CHAN_IDX_PROFILE_3] = "profile3",
+	[AD9910_CHAN_IDX_PROFILE_4] = "profile4",
+	[AD9910_CHAN_IDX_PROFILE_5] = "profile5",
+	[AD9910_CHAN_IDX_PROFILE_6] = "profile6",
+	[AD9910_CHAN_IDX_PROFILE_7] = "profile7",
+};
+
+static int ad9910_read_label(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     char *label)
+{
+	return sysfs_emit(label, "%s\n", ad9910_channel_str[chan->address]);
+}
+
+static const struct iio_info ad9910_info = {
+	.read_raw = ad9910_read_raw,
+	.write_raw = ad9910_write_raw,
+	.write_raw_get_fmt = ad9910_write_raw_get_fmt,
+	.read_label = ad9910_read_label,
+	.debugfs_reg64_access = &ad9910_debugfs_reg_access,
+};
+
+static int ad9910_cfg_sysclk(struct ad9910_state *st, bool update)
+{
+	u32 cfr3 = AD9910_CFR3_OPEN_MSK;
+	u32 tmp32;
+
+	cfr3 |= FIELD_PREP(AD9910_CFR3_DRV0_MSK, st->data.refclk_out_drv);
+
+	if (st->data.pll_enabled) {
+		tmp32 = st->data.pll_charge_pump_current - AD9910_ICP_MIN_uA;
+		tmp32 = DIV_ROUND_CLOSEST(tmp32, AD9910_ICP_STEP_uA);
+		cfr3 |= FIELD_PREP(AD9910_CFR3_ICP_MSK, tmp32) |
+			AD9910_CFR3_PLL_EN_MSK;
+	} else {
+		cfr3 |= AD9910_CFR3_ICP_MSK |
+			AD9910_CFR3_REFCLK_DIV_RESETB_MSK |
+			AD9910_CFR3_PFD_RESET_MSK;
+	}
+	st->reg[AD9910_REG_CFR3].val32 = cfr3;
+
+	return ad9910_set_sysclk_freq(st, AD9910_MAX_SYSCLK_HZ, update);
+}
+
+static int ad9910_parse_fw(struct ad9910_state *st)
+{
+	static const char * const refclk_out_drv0[] = {
+		"disabled", "low", "medium", "high",
+	};
+	struct device *dev = &st->spi->dev;
+	const char *prop;
+	u32 tmp;
+	int ret;
+
+	st->data.pll_enabled = device_property_read_bool(dev, "adi,pll-enable");
+	if (st->data.pll_enabled) {
+		prop = "adi,charge-pump-current-microamp";
+		if (device_property_present(dev, prop)) {
+			ret = device_property_read_u32(dev, prop, &tmp);
+			if (ret)
+				return dev_err_probe(dev, ret, "property read: %s\n", prop);
+
+			if (tmp < AD9910_ICP_MIN_uA || tmp > AD9910_ICP_MAX_uA)
+				return dev_err_probe(dev, -ERANGE,
+						     "invalid charge pump current %u\n", tmp);
+		} else {
+			tmp = AD9910_ICP_MIN_uA;
+		}
+		st->data.pll_charge_pump_current = tmp;
+
+		prop = "adi,refclk-out-drive-strength";
+		if (device_property_present(dev, prop)) {
+			ret = device_property_match_property_string(dev, prop,
+								    refclk_out_drv0,
+								    ARRAY_SIZE(refclk_out_drv0));
+			if (ret < 0)
+				return dev_err_probe(dev, ret, "property read: %s\n", prop);
+
+			st->data.refclk_out_drv = ret;
+		}
+	}
+
+	return 0;
+}
+
+static void ad9910_sw_powerdown_action(void *data)
+{
+	ad9910_sw_powerdown_set(data, true);
+}
+
+static void ad9910_hw_powerdown_action(void *data)
+{
+	struct ad9910_state *st = data;
+
+	gpiod_set_value_cansleep(st->gpio_pwdown, 1);
+}
+
+static int ad9910_setup(struct device *dev, struct ad9910_state *st,
+			struct reset_control *dev_rst)
+{
+	int ret;
+
+	ret = reset_control_assert(dev_rst);
+	if (ret)
+		return ret;
+
+	fsleep(AD9910_RESET_DELAY_us);
+
+	ret = reset_control_deassert(dev_rst);
+	if (ret)
+		return ret;
+
+	ret = ad9910_reg32_write(st, AD9910_REG_CFR1,
+				 (st->spi->mode & SPI_3WIRE ? 0 :
+				 AD9910_CFR1_SDIO_INPUT_ONLY_MSK), false);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, ad9910_sw_powerdown_action, st);
+	if (ret)
+		return ret;
+
+	ret = ad9910_reg32_write(st, AD9910_REG_CFR2,
+				 AD9910_CFR2_AMP_SCALE_SINGLE_TONE_MSK |
+				 AD9910_CFR2_SYNC_TIMING_VAL_DISABLE_MSK |
+				 AD9910_CFR2_DRG_NO_DWELL_MSK |
+				 AD9910_CFR2_DATA_ASM_HOLD_LAST_MSK |
+				 AD9910_CFR2_SYNC_CLK_EN_MSK |
+				 AD9910_CFR2_PDCLK_ENABLE_MSK, false);
+	if (ret)
+		return ret;
+
+	ret = ad9910_cfg_sysclk(st, false);
+	if (ret)
+		return ret;
+
+	ret = ad9910_set_dac_current(st, AD9910_DAC_IOUT_DEFAULT_uA, false);
+	if (ret)
+		return ret;
+
+	return ad9910_io_update(st);
+}
+
+static int ad9910_probe(struct spi_device *spi)
+{
+	static const char * const supplies[] = {
+		"dvdd-io33", "avdd33", "dvdd18", "avdd18",
+	};
+	struct device *dev = &spi->dev;
+	struct reset_control *dev_rst;
+	struct gpio_desc *io_rst_gpio;
+	struct iio_dev *indio_dev;
+	struct ad9910_state *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->spi = spi;
+
+	indio_dev->name = "ad9910";
+	indio_dev->info = &ad9910_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad9910_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad9910_channels);
+
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
+	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(supplies), supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	st->refclk = devm_clk_get_enabled(dev, "ref_clk");
+	if (IS_ERR(st->refclk))
+		return dev_err_probe(dev, PTR_ERR(st->refclk),
+				     "Failed to get reference clock\n");
+
+	dev_rst = devm_reset_control_get_optional_exclusive(dev, NULL);
+	if (IS_ERR(dev_rst))
+		return dev_err_probe(dev, PTR_ERR(dev_rst),
+				     "failed to get device reset control\n");
+
+	/*
+	 * The IO RESET pin is not used in this driver, as we assume that all
+	 * SPI transfers are complete, but if it is wired up, we need to make
+	 * sure it is not floating. We can use either a reset controller or a
+	 * GPIO for this.
+	 */
+	io_rst_gpio = devm_gpiod_get_optional(dev, "io-reset", GPIOD_OUT_LOW);
+	if (IS_ERR(io_rst_gpio))
+		return dev_err_probe(dev, PTR_ERR(io_rst_gpio),
+				     "failed to get io reset gpio\n");
+
+	st->gpio_update = devm_gpiod_get_optional(dev, "update", GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_update))
+		return dev_err_probe(dev, PTR_ERR(st->gpio_update),
+				     "failed to get update gpio\n");
+
+	st->gpio_profile = devm_gpiod_get_array_optional(dev, "profile",
+							 GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_profile))
+		return dev_err_probe(dev, PTR_ERR(st->gpio_profile),
+				     "failed to get profile gpios\n");
+
+	if (st->gpio_profile && st->gpio_profile->ndescs != 3)
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid number of profile gpios\n");
+
+	st->gpio_pwdown = devm_gpiod_get_optional(dev, "powerdown",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(st->gpio_pwdown))
+		return dev_err_probe(dev, PTR_ERR(st->gpio_pwdown),
+				     "failed to get powerdown gpio\n");
+
+	ret = devm_add_action_or_reset(dev, ad9910_hw_powerdown_action, st);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to add hw powerdown action\n");
+
+	fsleep(AD9910_WAKEUP_DELAY_us);
+
+	ret = ad9910_parse_fw(st);
+	if (ret)
+		return ret;
+
+	ret = ad9910_setup(dev, st, dev_rst);
+	if (ret)
+		return dev_err_probe(dev, ret, "device setup failed\n");
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct spi_device_id ad9910_id[] = {
+	{ .name = "ad9910" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad9910_id);
+
+static const struct of_device_id ad9910_of_match[] = {
+	{ .compatible = "adi,ad9910" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad9910_of_match);
+
+static struct spi_driver ad9910_driver = {
+	.driver = {
+		.name = "ad9910",
+		.of_match_table = ad9910_of_match,
+	},
+	.probe = ad9910_probe,
+	.id_table = ad9910_id,
+};
+module_spi_driver(ad9910_driver);
+
+MODULE_AUTHOR("Rodrigo Alencar <[email protected]>");
+MODULE_DESCRIPTION("Analog Devices AD9910 DDS driver");
+MODULE_LICENSE("GPL");

-- 
2.43.0