[PATCH v3 17/22] dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator

Changhuang Liang <[email protected]>
Newsgroups org.kernel.vger.linux-hardening,org.infradead.lists.linux-riscv,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.netdev
Message-ID <[email protected]> 
Add bindings for the Peripheral-2 clock and reset generator (PER2CRG)
on the JHB100 RISC-V SoC by StarFive Ltd.

Signed-off-by: Changhuang Liang <[email protected]>
---
 .../clock/starfive,jhb100-per2crg.yaml        | 76 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jhb100-crg.h   | 57 ++++++++++++++
 .../dt-bindings/reset/starfive,jhb100-crg.h   | 17 +++++
 3 files changed, 150 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml b/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
new file mode 100644
index 000000000000..175654645221
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jhb100-per2crg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JHB100 Peripheral-2 Clock and Reset Generator
+
+maintainers:
+  - Changhuang Liang <[email protected]>
+
+properties:
+  compatible:
+    const: starfive,jhb100-per2crg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Non Coherent NOC Initiator
+      - description: Configure 400MHz
+      - description: Configure 125MHz
+      - description: GMAC2 RGMII RX
+      - description: GMAC2 RMII Reference
+      - description: GMAC3 SGMII TX
+      - description: GMAC3 SGMII RX
+      - description: Main Oscillator (25 MHz)
+
+  clock-names:
+    items:
+      - const: ncnoc_init
+      - const: cfg_400
+      - const: cfg_125
+      - const: gmac2_rgmii_rx
+      - const: gmac2_rmii_ref
+      - const: gmac3_sgmii_tx
+      - const: gmac3_sgmii_rx
+      - const: osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jhb100-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jhb100-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11bc0000 {
+      compatible = "starfive,jhb100-per2crg";
+      reg = <0x11bc0000 0x1000>;
+      clocks = <&sys0crg 52>, <&sys0crg 54>, <&sys0crg 55>,
+               <&per2_gmac2_rgmii_rx>, <&per2_gmac2_rmii_ref>,
+               <&per2_gmac3_sgmii_tx>, <&per2_gmac3_sgmii_rx>,
+               <&osc>;
+      clock-names = "ncnoc_init", "cfg_400", "cfg_125",
+                    "gmac2_rgmii_rx", "gmac2_rmii_ref",
+                    "gmac3_sgmii_tx", "gmac3_sgmii_rx",
+                    "osc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jhb100-crg.h b/include/dt-bindings/clock/starfive,jhb100-crg.h
index 7f508574177c..2b2e148ce5ce 100644
--- a/include/dt-bindings/clock/starfive,jhb100-crg.h
+++ b/include/dt-bindings/clock/starfive,jhb100-crg.h
@@ -447,4 +447,61 @@
 #define JHB100_PER1CLK_MAIN_ICG_EN_RAS			75
 #define JHB100_PER1CLK_MAIN_ICG_EN_UFS			76
 
+/* PER2CRG clocks */
+#define JHB100_PER2CLK_300				0
+#define JHB100_PER2CLK_100				1
+#define JHB100_PER2CLK_50				2
+#define JHB100_PER2CLK_GMAC2_RMII_50			3
+#define JHB100_PER2CLK_CAN0_CORE_DIV			4
+#define JHB100_PER2CLK_CAN1_CORE_DIV			5
+#define JHB100_PER2CLK_CAN0_TIMER			6
+#define JHB100_PER2CLK_CAN1_TIMER			7
+
+#define JHB100_PER2CLK_RTC_CORE_DIV			11
+#define JHB100_PER2CLK_GMAC2_RMII_MUX_DLY		12
+#define JHB100_PER2CLK_GMAC2_RMII_DIV			13
+
+#define JHB100_PER2CLK_GMAC2_RGMII_125_MUX		15
+#define JHB100_PER2CLK_GMAC2_RGMII_DIV			16
+#define JHB100_PER2CLK_GMAC2_TX_MUX			17
+#define JHB100_PER2CLK_GMAC2_TX_180_BUF			18
+#define JHB100_PER2CLK_GMAC2_RX_MUX_DLY			19
+#define JHB100_PER2CLK_GMAC2_RX_180_BUF			20
+#define JHB100_PER2CLK_GMAC2_TXCK_MUX_DLY		21
+#define JHB100_PER2CLK_GMAC3_TX_125_MUX			22
+#define JHB100_PER2CLK_GMAC3_RX_125_MUX			23
+#define JHB100_PER2CLK_GMAC3_TX_DIV			24
+#define JHB100_PER2CLK_GMAC3_RX_DIV			25
+#define JHB100_PER2CLK_SENSORS_PERIPH2			26
+
+#define JHB100_PER2CLK_FAN_TACH_PCLK			33
+
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_I		44
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_I		45
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_TX_180_I	46
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RX_180_I	47
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_PTP_REF_I	48
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_RMII_I	49
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_CSR_I	50
+#define JHB100_PER2CLK_ETHER0_RMIIANDRGMII_ACLK_I	51
+#define JHB100_PER2CLK_RMIIANDRGMII_IOMUX_GMAC2_TXCK	52
+#define JHB100_PER2CLK_ETHER1_SGMII_TX_I		53
+#define JHB100_PER2CLK_ETHER1_SGMII_RX_I		54
+#define JHB100_PER2CLK_ETHER1_SGMII_TX_125_I		55
+#define JHB100_PER2CLK_ETHER1_SGMII_RX_125_I		56
+#define JHB100_PER2CLK_ETHER1_SGMII_PTP_REF_I		57
+#define JHB100_PER2CLK_ETHER1_SGMII_CSR_I		58
+#define JHB100_PER2CLK_ETHER1_SGMII_ACLK_I		59
+#define JHB100_PER2CLK_ETHER1_SGMII_PHY_PCLK_I		60
+#define JHB100_PER2CLK_ETHER1_SGMII_REF_25_I		61
+#define JHB100_PER2CLK_MAIN_ICG_EN_CAN0			62
+#define JHB100_PER2CLK_MAIN_ICG_EN_CAN1			63
+
+#define JHB100_PER2CLK_MAIN_ICG_EN_DMAC_8CH		65
+#define JHB100_PER2CLK_MAIN_ICG_EN_RTC_SCAN		66
+#define JHB100_PER2CLK_MAIN_ICG_EN_ADC0			67
+#define JHB100_PER2CLK_MAIN_ICG_EN_ADC1			68
+#define JHB100_PER2CLK_MAIN_ICG_EN_GMAC2		69
+#define JHB100_PER2CLK_MAIN_ICG_EN_GMAC3		70
+
 #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JHB100_H__ */
diff --git a/include/dt-bindings/reset/starfive,jhb100-crg.h b/include/dt-bindings/reset/starfive,jhb100-crg.h
index cf933a1befbb..0965f3798397 100644
--- a/include/dt-bindings/reset/starfive,jhb100-crg.h
+++ b/include/dt-bindings/reset/starfive,jhb100-crg.h
@@ -157,4 +157,21 @@
 #define JHB100_PER1RST_MAIN_RSTN_DMAC_SPI0				15
 #define JHB100_PER1RST_MAIN_RSTN_PERIPH1_RAS				16
 
+/* PER2CRG resets */
+#define JHB100_PER2RST_IOMUX_PRESETN					0
+#define JHB100_PER2RST_POK_IOMUX_PRESETN				1
+#define JHB100_PER2RST_SYSREG_RSTN					2
+#define JHB100_PER2RST_MAIN_RSTN_CAN0					3
+#define JHB100_PER2RST_MAIN_RSTN_CAN1					4
+#define JHB100_PER2RST_FAN_TACH_PRESETN					5
+#define JHB100_PER2RST_MAIN_RSTN_GMAC2					6
+#define JHB100_PER2RST_MAIN_RSTN_GMAC3					7
+#define JHB100_PER2RST_MAIN_RSTN_DMAC_8CH				8
+#define JHB100_PER2RST_MAIN_RSTN_RTC					9
+#define JHB100_PER2RST_ADC0_PRESETN					10
+#define JHB100_PER2RST_ADC0_IOMUX_PRESETN				11
+#define JHB100_PER2RST_ADC1_PRESETN					12
+#define JHB100_PER2RST_ADC1_IOMUX_PRESETN				13
+#define JHB100_PER2RST_MAIN_RSTN_PERIPH2_SENSORS			14
+
 #endif /* __DT_BINDINGS_RESET_STARFIVE_JHB100_CRG_H__ */
-- 
2.25.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.