Re: [PATCH 3/3] iio: light: stk3310: support the Sensortek STK36C61

On Mon, Aug 10, 2026 at 09:37:21PM +0300, Andy Shevchenko wrote:
> > -	if (chan->type != IIO_LIGHT && chan->type != IIO_PROXIMITY)
> > +	if (chan->type != IIO_LIGHT && chan->type != IIO_PROXIMITY &&
> > +	    chan->type != IIO_INTENSITY)
> >  		return -EINVAL;
>
> Is this now a duplicating a bit with the below choices?

A bit, in the int_time and scale arms. The check at the top is
pre-existing (this patch only adds IIO_INTENSITY to it) and is the
only type filter for the RAW case, which serves all three types
through chan->address with no per-type branching of its own.

> >  	case IIO_CHAN_INFO_INT_TIME:
> >  		if (chan->type == IIO_LIGHT)
> >  			ret = regmap_field_read(data->reg_als_it, &index);
> > -		else
> > +		else if (chan->type == IIO_PROXIMITY)
> >  			ret = regmap_field_read(data->reg_ps_it, &index);
> > +		else
> > +			return -EINVAL;
>
> If you want to keep a single point of return, use
>
> 			ret = -EINVAL;
>
> here and below in _read_raw().

Neither of the new else branches is reachable today: the colour
channels declare RAW only, so no int_time or scale attribute exists
for them, and in-kernel readers are gated by iio_channel_has_info().
I would rather keep them than have a bare else read as proximity for
a colour channel. v2 writes them with ret = -EINVAL as you suggest,
falling into the existing if (ret < 0) return ret.

Thanks,
Jorijn