[PATCH v4 7/7] arm64: dts: qcom: Add Xiaomi Redmi 9T

Adam Skladowski <[email protected]>
Newsgroups org.kernel.vger.linux-hardening,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
Add a devicetree for the Xiaomi Redmi 9T smartphone, which is based
on the Bengal/SM6115 SoC.

Supported functionality as of this initial submission:

* Display via SimpleFB/SimpleDRM
* GPU
* I2C peripherals (Backlight)
* Power Button, Volume Keys
* Regulators
* Remoteprocs (ADSP, CDSP, MPSS)
* UFS/SDCARD
* USB

Device tree also contains supply maps to other subsystems like MDSS
but due to missing dependencies like panel those are disabled.

Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Adam Skladowski <[email protected]>
---
 arch/arm64/boot/dts/qcom/Makefile                |   1 +
 arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts | 497 +++++++++++++++++++++++
 2 files changed, 498 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1487f2beff3d..34789de13552 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -344,6 +344,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-xiaomi-lemon.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-ginkgo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
new file mode 100644
index 000000000000..881e05b70116
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2026 Adam Skladowski <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+#include "pmi632.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_ipa_fw_mem;
+/delete-node/ &pil_ipa_gsi_mem;
+
+/ {
+	model = "Xiaomi Redmi 9T";
+	compatible = "xiaomi,lemon", "qcom,sm6115";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	backlight_dsi: backlight-dsi {
+		compatible = "led-backlight";
+		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
+		/* Backlight controllers can differ between panel variants */
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		pil_adsp_mem: memory@53400000 {
+			reg = <0x0 0x53400000 0x0 0x2600000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@55a00000 {
+			reg = <0x0 0x55a00000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@55a10000 {
+			reg = <0x0 0x55a10000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@fa400000 {
+			reg = <0x0 0xfa400000 0x0 0x2000>;
+			no-map;
+		};
+
+		ramoops: ramoops@64000000 {
+			compatible = "ramoops";
+			no-map;
+			reg = <0x0 0x64000000 0x0 0x400000>;
+			record-size = <0x100000>;
+			console-size = <0x100000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&dispcc {
+	/* Prevent simplefb from dying until we wire panel driver */
+	status = "disabled";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm36923_bl: led-controller@36 {
+		compatible = "ti,lm36923";
+		reg = <0x36>;
+
+		pinctrl-0 = <&lm3692x_bl_active>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+		ti,ovp-microvolt = <29000000>;
+		/* Backlight controllers can differ between panel variants */
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led_backlight: led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			label = ":backlight";
+			linux,default-trigger = "backlight";
+			led-max-microamp = <25000>;
+		};
+	};
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18>;
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&pil_cdsp_mem {
+	reg = <0x0 0x51a00000 0x0 0xa00000>;
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		vbus-supply = <&pmi632_vbus>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1000000>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		pm6125_s8: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l1: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+
+			regulator-always-on;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7: l7 {
+			/* sdhci2 vdd-io-bias supply */
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+
+			regulator-always-on;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1768000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+
+			regulator-always-on;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+	/* No binding for vdd-io-bias on L7*/
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>; /* Fingerprint SPI */
+
+	lm3692x_bl_active: lm3692x-active-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <0x02>;
+		bias-pull-up;
+	};
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	te_active: te-active-state {
+		pins = "gpio81";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-max-microamp = <600000>;
+	vcc-supply = <&pm6125_l24>;
+	vccq2-max-microamp = <600000>;
+	vccq2-supply = <&pm6125_l11>;
+	vdd-hba-supply = <&pm6125_l18>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+
+	status = "okay";
+};
+
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};

-- 
2.55.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.