Re: [PATCH v5 1/2] dt-bindings: iio: adc: add maxim,max40080

On Thu, Jul 23, 2026 at 09:50:35AM +0300, Stefan Popa wrote:
> Add device tree bindings for the Maxim MAX40080 bidirectional
> current-sense amplifier with a 12-bit ADC and an I2C/SMBus interface.
> 
> Signed-off-by: Stefan Popa <[email protected]>
> ---
>  .../bindings/iio/adc/maxim,max40080.yaml      | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max40080.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max40080.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max40080.yaml
> new file mode 100644
> index 0000000000000..170bf4eff8706
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max40080.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/maxim,max40080.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim MAX40080 bidirectional current-sense amplifier
> +
> +maintainers:
> +  - Ciprian Hegbeli <[email protected]>
> +  - Stefan Popa <[email protected]>
> +
> +description: |
> +  The MAX40080 is a high-precision, bidirectional current-sense amplifier with
> +  an integrated 12-bit ADC and an I2C/SMBus interface. It measures the voltage
> +  across an external shunt resistor and the input bus voltage, and stores the
> +  results in an internal FIFO.
> +
> +  Datasheet:
> +    https://www.analog.com/en/products/max40080.html
> +
> +properties:
> +  compatible:
> +    const: maxim,max40080

ADI want newly documented devices to use the "adi" prefix.
pw-bot: changes-requested
Otherwise,
Reviewed-by: Conor Dooley <[email protected]>

Thanks,
Conor.

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCamJEGAAKCRB4tDGHoIJi
0oKDAP9jP0uqDFmcLoFN0w7K0Lq6OLJKSLMyTH2o8dzwUbWBEwD/e960fPepKrI9
AQh9KZXUb+6+eZG0P0zTtnHRKrghKwI=
=9inJ
-----END PGP SIGNATURE-----