Re: [PATCH v4 2/2] hwmon: (pmbus/vt7505) Add driver for Analog Devices MAX16545/MAX16550 and Volterra VT7505

[email protected]
Newsgroups org.kernel.vger.linux-hwmon,org.kernel.vger.linux-devicetree
Message-ID <[email protected]>
> From: Georgi Vlaev <[email protected]>
> 
> Add a PMBus driver for the Analog Devices MAX16545 and MAX16550, and the
> Volterra VT7505 controllers. The driver reports input/output voltage,
> input/output current, input power and temperature over PMBus. All values
> use the direct data format. Peak input voltage, output voltage, output
> current, input power and temperature readings are exposed and can be
> reset.
> 
> The reported current and power depend on the external current-report
> resistor connected to the ILOAD pin, which can be provided through the
> "adi,rload-ohms" device tree property.
> 
> On the MAX16550 and VT7505, the severe-OCP deglitch time can optionally
> be configured with the "adi,ocp-severe-filter-us" device tree property.
> When omitted, the existing hardware setting is left unchanged.
> 
> Co-developed-by: Dhruva Devineni <[email protected]>
> Co-developed-by: Debjit Ghosh <[email protected]>
> Co-developed-by: JawaharBalaji Thirumalaisamy <[email protected]>
> Co-developed-by: Avadhut Naik <[email protected]>
> Co-developed-by: Santhanakrishnan Balraj <[email protected]>
> Co-developed-by: Brian Mak <[email protected]>
> Signed-off-by: Georgi Vlaev <[email protected]>
> Signed-off-by: Sanman Pradhan <[email protected]>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.