Re: [PATCH 1/4] hwmon: (ina2xx) Replace regmap in ina226_alert_read() with ina2xx_data

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Reading an inactive alarm attribute clears the hardware alert flag, causing the active alarm to falsely report as inactive (0).
--

--- Patch [1]: [PATCH 1/4] hwmon: (ina2xx) Replace regmap in ina226_alert_read() with ina2xx_data ---
commit 966375fc88632d14769d99061017ac107e2c8899
Author: Jared Kangas <[email protected]>

hwmon: (ina2xx) Replace regmap in ina226_alert_read() with ina2xx_data

This commit updates ina226_alert_read() to accept a struct ina2xx_data
pointer instead of a struct regmap. This mirrors the signatures used by
the alert limit read and write functions.

> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
> --- a/drivers/hwmon/ina2xx.c
> +++ b/drivers/hwmon/ina2xx.c
> @@ -476,12 +476,12 @@ static int ina2xx_chip_read(struct device *dev, u32 attr, long *val)

[ ... ]

> -static int ina226_alert_read(struct regmap *regmap, u32 mask, long *val)
> +static int ina226_alert_read(struct ina2xx_data *data, u32 mask, long *val)
>  {
>  	unsigned int regval;
>  	int ret;
>  
> -	ret = regmap_read_bypassed(regmap, INA226_MASK_ENABLE, &regval);
> +	ret = regmap_read_bypassed(data->regmap, INA226_MASK_ENABLE, &regval);

[Severity: High]
This is a pre-existing issue, but I have a question about how the hardware
alert state is managed here in ina226_alert_read().

Since the INA226_MASK_ENABLE register clears the Alert Function Flag when
read, does this bypassed hardware read clear the alert flag unintentionally
if an inactive alarm attribute is polled?

For example, if userspace utilities sequentially read sysfs alarm attributes,
could checking an inactive alarm trigger this clear-on-read behavior before
the actually active alarm is polled? It seems this sequence would cause the
active alarm to falsely report as inactive (0).

>  	if (ret)
>  		return ret;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260729-upstream-ina2xx-in0-curr1-alarms-v1-0-349f7b2f1df8@redhat.com?part=1