Re: [hwmon-next PATCH v5 1/4] dt-bindings: hwmon: add adi,adt7470
[email protected] Thu, 30 Jul 2026 21:34:20 +0000
| Newsgroups | org.kernel.vger.linux-hwmon,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
Thank you for your contribution! Sashiko AI review found 1 potential issue(= s) to consider: - [Medium] The provider capability property `#pwm-cells` is omitted from th= e `required` list despite the hardware functioning as a PWM provider. -- --- Patch [1]: [hwmon-next PATCH v5 1/4] dt-bindings: hwmon: add adi,adt747= 0 --- commit 5105b0d67f8fd87224b8f539a86af2d5d3710517 Author: Luiz Angelo Daros de Luca <[email protected]> dt-bindings: hwmon: add adi,adt7470 This commit adds device tree binding documentation for the Analog Devices ADT7470 multichannel temperature sensor and PWM fan controller. It defines properties for thermal sensors and models the fan control lines as PWM channels. > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml b/D= ocumentation/devicetree/bindings/hwmon/adi,adt7470.yaml > new file mode 100644 > index 0000000000000..f653a06f241aa > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/adi,adt7470.yaml > @@ -0,0 +1,58 @@ [ ... ] > +properties: > + compatible: > + const: adi,adt7470 > + > + reg: > + maxItems: 1 > + > + "#pwm-cells": > + const: 3 > + > + "#thermal-sensor-cells": > + const: 1 > + description: > + Valid index values are 0 to 9, corresponding to temp1 through temp= 10. > + > +required: > + - compatible > + - reg [Severity: Medium] Since the device acts as a PWM provider and defines #pwm-cells, should #pwm-cells be added to this required list?=20 The device tree bindings subsystem guidelines state that when a device adds provider capabilities like PWM output, the corresponding standard properties must appear in the required list. Without it, incomplete device tree nodes that are missing #pwm-cells will pass schema validation, which could mask configurations that will fail at runtime when dependent consumers attempt to use the PWM capability. > + > +unevaluatedProperties: false [ ... ] --=20 Sashiko AI review =C2=B7 https://sashiko.dev/#/patchset/20260730-adt7470_th= [email protected]?part=3D1