[PATCH 5/5] hwmon: (pmbus/ir36021) Use pmbus_read_smbus_i2c_block_data for block commands

The driver uses i2c_smbus_read_i2c_block_data() for PMBus block commands.
Use pmbus_read_smbus_i2c_block_data() instead to enable the driver to work
with I2C controllers which do not support i2c_smbus_read_i2c_block_data().

Drop the functionality check to get an explicit error message if the
required SMBus commands are not supported.

Signed-off-by: Guenter Roeck <[email protected]>
---
 drivers/hwmon/pmbus/ir36021.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/hwmon/pmbus/ir36021.c b/drivers/hwmon/pmbus/ir36021.c
index 0dce4c3f666f..58d8c4aac0d1 100644
--- a/drivers/hwmon/pmbus/ir36021.c
+++ b/drivers/hwmon/pmbus/ir36021.c
@@ -31,21 +31,13 @@ static int ir36021_probe(struct i2c_client *client)
 	u8 buf[I2C_SMBUS_BLOCK_MAX];
 	int ret;
 
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_READ_BYTE_DATA
-				     | I2C_FUNC_SMBUS_READ_WORD_DATA
-				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
-		return -ENODEV;
-
-	ret = i2c_smbus_read_i2c_block_data(client, PMBUS_MFR_MODEL, 2, buf);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
-		return ret;
-	}
-	if (ret != 2 || buf[0] != 0x01 || buf[1] != 0x2d) {
-		dev_err(&client->dev, "MFR_MODEL unrecognised\n");
-		return -ENODEV;
-	}
+	ret = pmbus_read_smbus_i2c_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to read PMBUS_MFR_MODEL\n");
+	if (ret != 1 || buf[0] != 0x2d)
+		return dev_err_probe(&client->dev, -ENODEV,
+				     "MFR_MODEL unrecognised\n");
 
 	return pmbus_do_probe(client, &ir36021_info);
 }
-- 
2.45.2