Re: [PATCH v2] hwmon: (k10temp) Add per-CCD temperature monitoring for Zen5 Turin

On Thu, Aug 13, 2026 at 05:02:08PM +0000, Gabriel Ford wrote:
> Add support for per-CCD temperature monitoring on Zen 5 Turin (EPYC 9005)
> CPUs, as they fall into a separate model range with a different offset
> and a higher maximum CCD count than their desktop counterparts. As such,
> this patch also updates the driver to support CPUs with up to 16 CCDs.
> Tested and working on an EPYC 9555P.
> 
> Signed-off-by: Gabriel Ford <[email protected]>

Seems safe enough. Applied.

> ---
For next time: change log goes here.

Thanks,
Guenter

>  drivers/hwmon/k10temp.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index de0760dc597d..43cade8c3631 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -207,6 +207,10 @@ static const char *k10temp_temp_label[] = {
>  	"Tccd10",
>  	"Tccd11",
>  	"Tccd12",
> +	"Tccd13",
> +	"Tccd14",
> +	"Tccd15",
> +	"Tccd16",
>  };
>  
>  static int k10temp_read_labels(struct device *dev,
> @@ -243,7 +247,7 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
>  			if (*val < 0 && !data->disp_negative)
>  				*val = 0;
>  			break;
> -		case 2 ... 13:		/* Tccd{1-12} */
> +		case 2 ... 17:		/* Tccd{1-16} */
>  			ret = read_ccd_temp_reg(data, channel - 2, &regval);
>  
>  			if (ret)
> @@ -384,7 +388,11 @@ static const struct hwmon_channel_info * const k10temp_info[] = {
>  			   HWMON_T_INPUT | HWMON_T_LABEL,
>  			   HWMON_T_INPUT | HWMON_T_LABEL,
>  			   HWMON_T_INPUT | HWMON_T_LABEL,
> -			   HWMON_T_INPUT | HWMON_T_LABEL),
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL),
>  	NULL
>  };
>  
> @@ -515,6 +523,10 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  		}
>  	} else if (boot_cpu_data.x86 == 0x1a) {
>  		switch (boot_cpu_data.x86_model) {
> +		case 0x00 ... 0x2f:	/* Zen5 Turin */
> +			data->ccd_offset = 0x1F0;
> +			k10temp_get_ccd_support(data, 16);
> +			break;
>  		case 0x40 ... 0x4f:	/* Zen5 Ryzen Desktop */
>  			data->ccd_offset = 0x308;
>  			k10temp_get_ccd_support(data, 8);