[PATCH v2 0/2] hwmon: Add Sensirion STS4x temperature sensor support

This patch series adds support for the Sensirion STS4x family of digital
temperature sensors by extending the existing sht4x driver and adding
the "sensirion,sts40" compatible string to trivial-devices.

The STS4x series shares the same I2C commands, conversion formulas,
CRC-8 checksum, and measurement timings with the SHT4x humidity and
temperature sensors, but returns 3 bytes of temperature data instead
of 6 bytes.

Changes in v2:
- Fixed heating_complete initialization in probe to prevent msleep
  delays on boot.
- Bypassed heater delay checks in sht4x_read_values() for STS4x.

Alessandro Zini (2):
  dt-bindings: trivial-devices: Add Sensirion STS4x series
  hwmon: (sht4x): Add support for Sensirion STS4x temperature sensors

 .../devicetree/bindings/trivial-devices.yaml  |  2 +
 Documentation/hwmon/sht4x.rst                 | 17 ++++-
 drivers/hwmon/sht4x.c                         | 62 ++++++++++++++-----
 3 files changed, 61 insertions(+), 20 deletions(-)

-- 
2.55.0