Re: [PATCH] hwmon: valid the data size before reading the sensor data

On Fri, 21 Aug 2026 23:41:26 -0700, Guenter Roeck wrote:
> Subject is supposed to be "hwmon: (driver) Description".
Oh, got it.
> 
> On 8/21/26 22:34, Edward Adam Davis wrote:
> > The user-forged sensor data is only 65 bytes long; however, aqc_raw_event()
> > fails to handle cases where the sensor data length is smaller than the buffer
> > size when reading the data, resulting in [1] during the read process.
> >
> 
> The device simulated by syzbot is D5 next, and its control buffer size is
> 0x329 or 809. I _asked_ earlier if that is the value to check against,
> but did not claim that this is actually the case.
> 
> We know that the report must be much longer than 65 bytes. D5NEXT_PUMP_OFFSET
> is 0x6c = 108, and the field is two bytes long, meaning the report size
> must be at least 110 bytes long. What we do not know is its actual length.
> 
> > Add a check for the data size, if it less than the buffer size, the sensor
> > data read is aborted.
> >
> 
> Apparently Sashiko is aware that this is wrong - not only is the report size
> smaller than 809 bytes, but apparently buffer_size is not even set for all
> supported devices.
Yes, I also realized that relying solely on the buffer size for the check
might be too simplistic or crude, so I adjusted the data length verification
method and submitted a second version of the patch.

BR,
Edward