Re: [PATCH 0/2] I2C SCL counter updates for Qualcomm IPQ5424 SoC

On 8/11/2026 6:11 PM, Mukesh Savaliya wrote:
>
>
> On 8/11/2026 2:53 PM, Kathiravan Thirumoorthy wrote:
>> To meet the specification requirement in the standard-mode bus 
>> frequency,
>> update the SCL counters as recommended by the design team.
>>
> Patches shows that you are adding frequency table for standard and 
> fast, for patch#1, and all three modes for patch#2. Please, Correct 
> accordingly.

Nope. Only for standard freq in patch #1. For FAST mode, it is just a 
stray space removal.

>> Also, SCL counters for the FW based SEs are different. Identify if the
>> SE is mini-core or firmware based and chose the appropriate counter
>> values.
>>
> Little better, select frequency parameters based on SE is is RTL core 
> or FW based core.

Ack.

>
>> Signed-off-by: Kathiravan Thirumoorthy 
>> <[email protected]>
>> ---
>> Kathiravan Thirumoorthy (2):
>>        i2c: qcom-geni: update frequency table to fix timing parameters
>>        i2c: qcom-geni: Add I2C frequency table for firmware-based SEs
>>
>>   drivers/i2c/busses/i2c-qcom-geni.c | 27 +++++++++++++++++++--------
>>   include/linux/soc/qcom/geni-se.h   |  1 +
>>   2 files changed, 20 insertions(+), 8 deletions(-)
>> ---
>> base-commit: 3d08ff75a47a3e7e2ab45a3bcab6723b4d906422
>> change-id: 20260808-ipq5424_i2c_scl_updates-f1696a0590fc
>>
>> Best regards,
>> -- 
>> Kathiravan Thirumoorthy <[email protected]>
>>
>