Re: [PATCH] ata: libata-eh: Increase STANDBY IMMEDIATE timeout

On 7/24/26 16:39, Matt Vollrath wrote:
> Correct a previous change (see Fixes) which reduced the standby timeout
> from 30 to 5 seconds. Increase it to 15 seconds.
> 
> I was troubleshooting an error spotted during system suspend:
> 
>     [ 1217.152867] ata1.00: Entering standby power mode
>     [ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0)
>     [ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4)
> 
> This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't
> aware of any reason it should be taking so long to standby. The issue is
> intermittent, but I observed it sometimes taking 7 seconds to manually
> standby. I assume this was interruption of background maintenance after
> a power outage.
> 
> As a desktop user, I would prefer to wait the extra 2 seconds at suspend
> to let the drive finish its business rather than drop the rails from
> under it.
> 
> The change from 30 to 5 seconds was implicit when switching suspend
> from START STOP UNIT to an internal command with no timeout table entry.
> No reason was stated for the change.
> 
> Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
> Cc: [email protected]
> Signed-off-by: Matt Vollrath <[email protected]>
> Assisted-by: Claude:claude-5-fable

Applied to for-7.2-fixes. Thanks!

-- 
Damien Le Moal
Western Digital Research