[PATCH v8 6/6] scsi: scsi_devinfo: add COMPAQ PD-1 multi-LUN ATAPI device quirk

The Compaq PD-1 (and equivalent Panasonic LF-1195C) is a combination
PD/CD-ROM drive that exposes two LUNs: LUN 0 is the CD-ROM and LUN 1
is the PD (Phase-change rewritable) drive.

Add a scsi_devinfo entry with BLIST_FORCELUN to enable multi-LUN
scanning, BLIST_SINGLELUN to prevent issuing LUN-aware commands
simultaneously, and BLIST_NO_LUN_1F to suppress spurious "No Device"
entries for unpopulated LUNs (which respond with PQ=0/PDT=0x1f).

Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Phil Pemberton <[email protected]>
---
 drivers/scsi/scsi_devinfo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 15ffbe93ac72..b3fbfcd5dd93 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -150,6 +150,8 @@ static struct {
 	{"COMPAQ", "MSA1000", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
 	{"COMPAQ", "MSA1000 VOLUME", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
 	{"COMPAQ", "HSV110", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
+	{"COMPAQ", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN |
+				 BLIST_NO_LUN_1F},
 	{"DDN", "SAN DataDirector", "*", BLIST_SPARSELUN},
 	{"DEC", "HSG80", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"DELL", "PV660F", NULL, BLIST_SPARSELUN},
-- 
2.43.0