[PATCH v2 2/3] iio: light: gp2ap002: re-enable irq if runtime suspend fails
Nikhil Gautam <[email protected]>
| Newsgroups | org.kernel.vger.linux-iio,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
gp2ap002_runtime_suspend() disables the irq before writing OPMOD. If
the write fails, the callback returns an error with the irq still
disabled while the PM core marks the device active again.
re-enable the irq before returning the error so the irq state matches
the active state the PM core restores.
Fixes: 97d642e23037c ("iio: light: Add a driver for Sharp GP2AP002x00F")
Signed-off-by: Nikhil Gautam <[email protected]>
---
drivers/iio/light/gp2ap002.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index 966459994995..e8ba9c00dabb 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -649,6 +649,7 @@ static int gp2ap002_runtime_suspend(struct device *dev)
/* Disable chip and IRQ, everything off */
ret = regmap_write(gp2ap002->map, GP2AP002_OPMOD, 0x00);
if (ret) {
+ enable_irq(gp2ap002->irq);
dev_err(gp2ap002->dev, "error setting up operation mode\n");
return ret;
}
--
2.39.5