Re: [PATCH v2 2/2] iio: dac: dac8163: Add driver for DAC8163

On Wed, Jul 08, 2026 at 09:58:13PM +0600, Siratul Islam wrote:
> > +
> > +	const struct reg_default reg_defaults[] = {
> > +		{
> > +			.reg = CMD_SET(CMD_WRITE_UPDATE, 0),
> > +			.def = info->default_output_reg,
> > +		},
> > +		{
> > +			.reg = CMD_SET(CMD_WRITE_UPDATE, 1),
> > +			.def = info->default_output_reg,
> > +		},
> > +	};
> > +
> > +	const struct regmap_config regmap_config = {
> > +		.reg_bits = 8,
> > +		.val_bits = 16,
> > +
> > +		.max_register = CMD_REF << 3,
> > +		.cache_type = REGCACHE_MAPLE,
> > +
> > +		.volatile_reg = dac8163_reg_false,
> > +
> > +		.reg_defaults = reg_defaults,
> > +		.num_reg_defaults = ARRAY_SIZE(reg_defaults),
> > +	};
> Why are these defined inside probe? Should be defined outside the function.

The default values after reset are different for the compatible devices
(0 for the dacxxx2 devices and mid-scale for the dacxxx3 devices).
So these are runtime dependent. The alternative would be to have two
regmap_configs for the two device types and add these to the chip_info.
Or do you have another suggestion?

Best regards

Lukas