[PATCH V21 2/9] dt-bindings: iio: imu: icm42600: Add icm42607

From: Chris Morgan <[email protected]>

Add the ICM42607 and ICM42607P inertial measurement unit.

This device is functionally very similar to the icm42600 series with a
very different register layout. The icm42607 currently does not use an
interrupt because wake on movement and buffers are not supported, and
cannot be implemented on my test device which lacks an interrupt line.

Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
 .../bindings/iio/imu/invensense,icm42600.yaml  | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 9b2af104f186..81b6e85decd5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -30,6 +30,8 @@ properties:
       - invensense,icm42600
       - invensense,icm42602
       - invensense,icm42605
+      - invensense,icm42607
+      - invensense,icm42607p
       - invensense,icm42622
       - invensense,icm42631
       - invensense,icm42686
@@ -67,10 +69,24 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,icm42600
+              - invensense,icm42602
+              - invensense,icm42605
+              - invensense,icm42622
+              - invensense,icm42631
+              - invensense,icm42686
+              - invensense,icm42688
+    then:
+      required:
+        - interrupts
 
 unevaluatedProperties: false
 
-- 
2.43.0