[PATCH v4 3/3] iio: adc: bcm_iproc_adc: Convert probe error handling to dev_err_probe()

From: Mohammad Shahid <[email protected]>

This simplifies the probe error handling by replacing open-coded
dev_err() and return sequences while preserving the existing
messages.

Signed-off-by: Mohammad Shahid <[email protected]>
---
 drivers/iio/adc/bcm_iproc_adc.c | 39 +++++++++++++++------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index 4acd9c3f089b..5fcd528eb88a 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -523,19 +523,16 @@ static int iproc_adc_probe(struct platform_device *pdev)
 
 	adc_priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 			   "adc-syscon");
-	if (IS_ERR(adc_priv->regmap)) {
-		dev_err(dev, "failed to get handle for tsc syscon\n");
-		ret = PTR_ERR(adc_priv->regmap);
-		return ret;
-	}
+	if (IS_ERR(adc_priv->regmap))
+		return dev_err_probe(dev,
+				     PTR_ERR(adc_priv->regmap),
+				     "failed to get handle for tsc syscon\n");
 
 	adc_priv->adc_clk = devm_clk_get(dev, "tsc_clk");
-	if (IS_ERR(adc_priv->adc_clk)) {
-		dev_err(dev,
-			"failed getting clock tsc_clk\n");
-		ret = PTR_ERR(adc_priv->adc_clk);
-		return ret;
-	}
+	if (IS_ERR(adc_priv->adc_clk))
+		return dev_err_probe(dev,
+				     PTR_ERR(adc_priv->adc_clk),
+				     "failed getting clock tsc_clk\n");
 
 	adc_priv->irqno = platform_get_irq(pdev, 0);
 	if (adc_priv->irqno < 0)
@@ -543,10 +540,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
 
 	ret = regmap_clear_bits(adc_priv->regmap, IPROC_REGCTL2,
 				IPROC_ADC_AUXIN_SCAN_ENA);
-	if (ret) {
-		dev_err(dev, "failed to write IPROC_REGCTL2 %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev,
+				     ret,
+				     "failed to write IPROC_REGCTL2\n");
 
 	ret = devm_request_threaded_irq(dev, adc_priv->irqno,
 				iproc_adc_interrupt_handler,
@@ -556,11 +553,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
 		return ret;
 
 	ret = clk_prepare_enable(adc_priv->adc_clk);
-	if (ret) {
-		dev_err(dev,
-			"clk_prepare_enable failed %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev,
+				     ret,
+				     "failed to enable clock\n");
 
 	ret = iproc_adc_enable(indio_dev);
 	if (ret)
@@ -574,7 +570,8 @@ static int iproc_adc_probe(struct platform_device *pdev)
 
 	ret = iio_device_register(indio_dev);
 	if (ret) {
-		dev_err(dev, "iio_device_register failed:err %d\n", ret);
+		dev_err_probe(dev, ret,
+			      "failed to register IIO device\n");
 		goto err_clk;
 	}
 
-- 
2.43.0