Re: [PATCH v2 4/6] iio: adc: ti-ads1015: use local device pointer in probe

On Tue, 28 Jul 2026 00:51:00 +0530
Archit Anant <[email protected]> wrote:

> Introduce a local device pointer 'dev' in ads1015_probe to
> avoid accessing &client->dev repeatedly.
> 
> Signed-off-by: Archit Anant <[email protected]>
Hi Archit,

To avoid churn in the series this should be done slightly different.
See below but in short it is a case of not updating everything in
this patch given you are going to touch the same code in the next
one.

> ---
>  drivers/iio/adc/ti-ads1015.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
> index 293fdd49381f..59ce2f89daeb 100644
> --- a/drivers/iio/adc/ti-ads1015.c
> +++ b/drivers/iio/adc/ti-ads1015.c
> @@ -933,6 +933,7 @@ static int ads1015_set_conv_mode(struct ads1015_data *data, int mode)
>  static int ads1015_probe(struct i2c_client *client)
>  {
>  	const struct ads1015_chip_data *chip;
> +	struct device *dev = &client->dev;
>  	struct iio_dev *indio_dev;
>  	struct ads1015_data *data;
>  	int ret;
> @@ -940,9 +941,9 @@ static int ads1015_probe(struct i2c_client *client)
>  
>  	chip = i2c_get_match_data(client);
>  	if (!chip)
> -		return dev_err_probe(&client->dev, -EINVAL, "Unknown chip\n");
> +		return dev_err_probe(dev, -EINVAL, "Unknown chip\n");
>  
> -	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
>  	if (!indio_dev)
>  		return -ENOMEM;
>  
> @@ -978,15 +979,15 @@ static int ads1015_probe(struct i2c_client *client)
>  					    &ads1015_regmap_config :
>  					    &tla2024_regmap_config);
>  	if (IS_ERR(data->regmap)) {
> -		dev_err(&client->dev, "Failed to allocate register map\n");
> +		dev_err(dev, "Failed to allocate register map\n");
>  		return PTR_ERR(data->regmap);

Leave updating this one for next patch (and ignore sashiko if it complains ;)

>  	}
>  
> -	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
>  					      ads1015_trigger_handler,
>  					      &ads1015_buffer_setup_ops);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "iio triggered buffer setup failed\n");
> +		dev_err(dev, "iio triggered buffer setup failed\n");
Likewise, do this as part of der_err_probe()
>  		return ret;
>  	}
>  
> @@ -1018,7 +1019,7 @@ static int ads1015_probe(struct i2c_client *client)
>  		if (ret)
>  			return ret;
>  
> -		ret = devm_request_threaded_irq(&client->dev, client->irq,
> +		ret = devm_request_threaded_irq(dev, client->irq,
>  						NULL, ads1015_event_handler,
>  						irq_trig | IRQF_ONESHOT,
>  						client->name, indio_dev);
> @@ -1032,18 +1033,18 @@ static int ads1015_probe(struct i2c_client *client)
>  
>  	data->conv_invalid = true;
>  
> -	ret = pm_runtime_set_active(&client->dev);
> +	ret = pm_runtime_set_active(dev);
>  	if (ret)
>  		return ret;
> -	pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS);
> -	pm_runtime_use_autosuspend(&client->dev);
> -	pm_runtime_enable(&client->dev);
> +	pm_runtime_set_autosuspend_delay(dev, ADS1015_SLEEP_DELAY_MS);
> +	pm_runtime_use_autosuspend(dev);
> +	pm_runtime_enable(dev);
>  
>  	ret = iio_device_register(indio_dev);
>  	if (ret < 0) {
> -		dev_err(&client->dev, "Failed to register IIO device\n");
> -		pm_runtime_disable(&client->dev);
> -		pm_runtime_set_suspended(&client->dev);
> +		dev_err(dev, "Failed to register IIO device\n");

Leave this one for dev_err_probe() patch.  Just this line not the ones around it.

> +		pm_runtime_disable(dev);
> +		pm_runtime_set_suspended(dev);
>  		return ret;
>  	}
>