[PATCH] iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind
Fan Wu <[email protected]> Sun, 2 Aug 2026 08:28:51 +0000
| Newsgroups | org.kernel.vger.linux-iio,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.kernel.vger.stable |
|---|---|
| Message-ID | <[email protected]> |
The ZYNQ XADC interrupt handler xadc_zynq_interrupt_handler() arms the
zynq_unmask_work delayed work via schedule_delayed_work() every time an
alarm condition is observed, and that worker re-arms itself for as long
as the alarm stays asserted.
In xadc_probe() the IRQ is requested with devm_request_irq() before the
devm_add_action_or_reset() that registers xadc_cancel_delayed_work().
Because devres release runs in LIFO order, on unbind the delayed work is
cancelled before the IRQ is freed. The IRQ is still live at that point,
so a pending alarm can make the handler run once more and re-arm
zynq_unmask_work after it has been cancelled; that instance then runs
after the xadc structure that embeds zynq_unmask_work has been freed, a
use-after-free in xadc_zynq_unmask_worker().
Register the cancel-work devm action before requesting the IRQ so devres
LIFO teardown frees (and synchronizes) the IRQ first, then cancels the
delayed work. After free_irq() the handler can no longer re-arm the
work, and the subsequent cancel_delayed_work_sync() drains any instance
armed just before the IRQ was torn down.
This issue was found by an in-house static analysis tool.
Fixes: 2a9685d1a3b7 ("iio: adc: xilinx: use more devres helpers and remove remove()")
Cc: [email protected]
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <[email protected]>
---
drivers/iio/adc/xilinx-xadc-core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1395,13 +1395,16 @@ static int xadc_probe(struct platform_device *pdev)
}
if (irq > 0) {
- ret = devm_request_irq(dev, irq, xadc->ops->interrupt_handler,
- 0, dev_name(dev), indio_dev);
+ /* devm LIFO: register the cancel-work action before the IRQ,
+ * so unbind frees the IRQ first, then drains the work.
+ */
+ ret = devm_add_action_or_reset(dev, xadc_cancel_delayed_work,
+ &xadc->zynq_unmask_work);
if (ret)
return ret;
- ret = devm_add_action_or_reset(dev, xadc_cancel_delayed_work,
- &xadc->zynq_unmask_work);
+ ret = devm_request_irq(dev, irq, xadc->ops->interrupt_handler,
+ 0, dev_name(dev), indio_dev);
if (ret)
return ret;
}
--
2.43.0