[PATCH v2] iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind

The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.

This issue was found by an in-house static analysis tool.

Fixes: 2a9685d1a3b7 ("iio: adc: xilinx: use more devres helpers and remove remove()")
Cc: [email protected]
Assisted-by: Codex:gpt-5.6
Reviewed-by: David Lechner <[email protected]>
Signed-off-by: Fan Wu <[email protected]>
---

Changes in v2: shorten the commit message and replace the multi-line code
comment with a one-line note, per review feedback from Jonathan Cameron.
The devm registration reorder (the fix) is unchanged; David Lechner's
Reviewed-by was obtained on v1.

 drivers/iio/adc/xilinx-xadc-core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1395,13 +1395,14 @@ static int xadc_probe(struct platform_device *pdev)
 	}

 	if (irq > 0) {
-		ret = devm_request_irq(dev, irq, xadc->ops->interrupt_handler,
-				       0, dev_name(dev), indio_dev);
+		/* Clear out any work queued by the interrupt */
+		ret = devm_add_action_or_reset(dev, xadc_cancel_delayed_work,
+					       &xadc->zynq_unmask_work);
 		if (ret)
 			return ret;

-		ret = devm_add_action_or_reset(dev, xadc_cancel_delayed_work,
-					       &xadc->zynq_unmask_work);
+		ret = devm_request_irq(dev, irq, xadc->ops->interrupt_handler,
+				       0, dev_name(dev), indio_dev);
 		if (ret)
 			return ret;
 	}
--
2.43.0