[PATCH v5 13/17] ARM: dts: microchip: sama7d65_curiosity: Enable ADC, DVFS
Varshini Rajendran <[email protected]>
| Newsgroups | org.kernel.vger.linux-iio,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Enable ADC and DVFS on SAMA7D65 Curiosity board. Configure the necessary power supply (vddana, vref) for the ADC, and enable cpu-supply for DVFS. Signed-off-by: Varshini Rajendran <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]> --- .../dts/microchip/at91-sama7d65_curiosity.dts | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts index 927c27260b6c..c2d1e5308170 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -79,6 +79,14 @@ reg_5v: regulator-5v { }; }; +&adc { + vddana-supply = <&vddout25>; + vref-supply = <&vddout25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; @@ -97,6 +105,10 @@ &can3 { status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; +}; + &dma0 { status = "okay"; }; @@ -334,6 +346,16 @@ &main_xtal { }; &pioa { + pinctrl_adc_default: adc-default { + pinmux = <PIN_PC5__GPIO>; + bias-disable; + }; + + pinctrl_adtrg_default: adtrg-default { + pinmux = <PIN_PB7__ADTRG>; + bias-pull-up; + }; + pinctrl_can1_default: can1-default { pinmux = <PIN_PD10__CANTX1>, <PIN_PD11__CANRX1>; @@ -457,3 +479,8 @@ input@0 { &slow_xtal { clock-frequency = <32768>; }; + +&vddout25 { + vin-supply = <&vdd_3v3>; + status = "okay"; +}; -- 2.34.1