[PATCH v3 0/3] Refactor Microchip MCP47FEB02 I2C driver in separate modules to add support for MCP48FEB02 SPI driver

Ariana Lazar <[email protected]>
Newsgroups org.kernel.vger.linux-iio,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
Refactor I2C driver implementation into separate modules in order to add
support for SPI MCP48FxBy1/2/4/8 DAC family on top of the I2C implementation.
The I2C and SPI devices have the same memory map and supported
functionalities.

Signed-off-by: Ariana Lazar <[email protected]>
---
Changes in v3:
- renumbering the patch version to include the first patch submision
- fix review comments device tree binding:
   - change 'additionalProperties' to unevaluatedProperties
   - add else branch with spi-max-frequency in the condition which checks
     if a device has SPI interface
   - correct SPI address example
   - add clock polarity and clock phase properties for SPI devices
   - enumerate I2C devices in lexicographic order from the description section
   - specify supported SPI modes using dependencies
- fix review comments driver:
   - remove unneccesarry libraries and add the missing ones
   - correct comment typo
   - return -ENODEV using dev_err_probe() in protocol probe functions
   - use named initializers
   - move defines for registers and enums from the header to the core file
   - add dev_set_drvdata() in probe()
   - move mutex aquiring from mcp47feb02_write_to_eeprom() to
     store_eeprom_store()
   - write correct value into Vref register in resume()
- Link to v2: https://lore.kernel.org/r/[email protected]

v2:
- include in the same patch series the refactoring of the driver and the
  support for SPI devices, but in different patches
- remove changes regarding review comments received not related to the
  code refactoring
- first version of the combined refactoring I2C and adding support for SPI
  driver
- Link to v1: https://lore.kernel.org/all/[email protected]

v1:
- first version which did not separate the refactoring and adding support for
  SPI devices (into different patches from the same series)

---
Ariana Lazar (3):
      iio: dac: mcp47feb02: refactor MCP47FEB02 I2C driver into two modules
      dt-bindings: iio: dac: add support for MCP48FEB02 SPI
      iio: dac: add support for Microchip MCP48FEB02

 .../bindings/iio/dac/microchip,mcp47feb02.yaml     | 221 +++++++++++---
 MAINTAINERS                                        |   5 +-
 drivers/iio/dac/Kconfig                            |  33 +-
 drivers/iio/dac/Makefile                           |   4 +-
 .../iio/dac/{mcp47feb02.c => mcp47feb02-core.c}    | 336 ++-------------------
 drivers/iio/dac/mcp47feb02-i2c.c                   | 144 +++++++++
 drivers/iio/dac/mcp47feb02-spi.c                   | 145 +++++++++
 drivers/iio/dac/mcp47feb02.h                       |  48 +++
 8 files changed, 576 insertions(+), 360 deletions(-)
---
base-commit: 9c6acc6e6555d34198e45cb0d309569dfbadf929
change-id: 20260625-mcp47feb02_refactor-fa8420ae3282

Best regards,
-- 
Ariana Lazar <[email protected]>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.