[PATCH v6 05/17] iio: adc: at91-sama5d2_adc: add condition to validate calibration data
Varshini Rajendran <[email protected]>
| Newsgroups | org.kernel.vger.linux-iio,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Add additional condition to validate the calibration data read from the NVMEM cell using the TAG of the packet. Signed-off-by: Varshini Rajendran <[email protected]> --- drivers/iio/adc/at91-sama5d2_adc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 82db8f2f4db0..5b21367cf6b4 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -2297,7 +2297,8 @@ static int at91_adc_temp_sensor_init(struct at91_adc_state *st, return dev_err_probe(dev, PTR_ERR(buf), "Failed to read calibration data!\n"); - if (len < layout->min_len * sizeof(*buf)) { + if (len < layout->min_len * sizeof(*buf) || + buf[layout->tag_idx] != AT91_TEMP_CALIB_TAG_ACST) { dev_err(dev, "Invalid calibration data!\n"); return -EINVAL; } -- 2.34.1