Re: [PATCH 1/7] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen4 ADC

On Thu, 6 Aug 2026 16:22:02 +0530
Jishnu Prakash <[email protected]> wrote:

> Hi Jonathan,
> 
> On 8/3/2026 5:19 AM, Jonathan Cameron wrote:
> > On Fri, 31 Jul 2026 23:36:14 +0530
> > Jishnu Prakash <[email protected]> wrote:
> >   
> >> PMIC5 Gen4 ADC is similar to PMIC5 Gen3 ADC, with several changes made for
> >> improved performance, mostly at the hardware level. The main differences are
> >> increased ratiometric conversion resolution (from 14 bits to 16 bits) and
> >> increased bit field width for PMIC SID (to allow communication with an
> >> increased number of PMICs, supported on latest SoCs).  
> > 
> > Hi Jishnu,
> > 
> > The mixed case is enough of a surprise (to me least) that I'd expect
> > there to either be more discussion here or for it to be handled first
> > as a dt binding patch to allow for v4 channels on v3 hardware.
> >   
> 
> If I understand your comment correctly, you mean I should either add a
> description of the mixed cases in the commit message, or split the
> patch - one patch to add the new compatible and one to add the new
> channel properties ?

Hi Jishnu,
> 

Yes. I was indeed not very clear!  That was exactly what I meant.

> I think it's slightly better to add details in the commit message
> and keep the changes in a single patch. What do you think ?

My preference would be split patches so the discussion is extra clear,
but I'm not that bothered if dt maintainers don't mind them being combined.

Jonathan

> 
> Thanks,
> Jishnu
> 
> 
> > That would provide a place for a description of why that is necessary and
> > then the following gen4 dt-bindings patch with gen3 channels would seem
> > like a natural extension.
> > 
> > Other than that this seems fine to me.
> > 
> > Jonathan
> >   
> >>
> >> Signed-off-by: Jishnu Prakash <[email protected]>
> >> ---
> >>  .../bindings/iio/adc/qcom,spmi-adc5-gen3.yaml      | 47 +++++++++++++++++++++-
> >>  1 file changed, 46 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-adc5-gen3.yaml