[PATCH 2/3] iio: adc: ade9000: fix overlapping scan_index for current and voltage channels

Current channels used scan_index "num" and voltage "num + 1", so with
phases 0, 1 and 2 the indices overlapped and no longer matched the
IA=0, VA=1, IB=2, VB=3, IC=4, VC=5 layout expected by
ade9000_waveform_buffer_config(). Phase B and C buffers were configured
incorrectly.

Use "num * 2" for current and "num * 2 + 1" for voltage to get the
non-overlapping 0/1, 2/3, 4/5 layout.

Fixes: 81de7b4619fc ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <[email protected]>
---
 drivers/iio/adc/ade9000.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ade9000.c b/drivers/iio/adc/ade9000.c
index 51cb43755a1f..167b1f4d6279 100644
--- a/drivers/iio/adc/ade9000.c
+++ b/drivers/iio/adc/ade9000.c
@@ -444,7 +444,7 @@ static const struct iio_chan_spec_ext_info ade9000_ext_info[] = {
 			      BIT(IIO_CHAN_INFO_CALIBSCALE),		\
 	.event_spec = ade9000_current_events,				\
 	.num_event_specs = ARRAY_SIZE(ade9000_current_events),		\
-	.scan_index = num,						\
+	.scan_index = num * 2,						\
 	.indexed = 1,							\
 	.scan_type = {							\
 		.sign = 's',						\
@@ -464,7 +464,7 @@ static const struct iio_chan_spec_ext_info ade9000_ext_info[] = {
 			      BIT(IIO_CHAN_INFO_FREQUENCY),		\
 	.event_spec = ade9000_voltage_events,				\
 	.num_event_specs = ARRAY_SIZE(ade9000_voltage_events),		\
-	.scan_index = num + 1,	/* interleave with current channels */	\
+	.scan_index = num * 2 + 1, /* interleave with current channels */	\
 	.indexed = 1,							\
 	.scan_type = {							\
 		.sign = 's',						\
-- 
2.43.0