[PATCH v2 0/3] Add driver for Invensense ICM42370P accelerometer

Invensense ICM42370P is a high performance MEMS MotionTracking 3-axis
accelerometer. It supports I2C, I3C and SPI protocols. It has a 2.25kB
FIFO and two programmable interrupts with support for ultra-low-power
wake-on-motion support. It has a built-in temperature sensor. This
patch series adds basic support for the sensor with functionality of
performing raw reads and writes along with buffered reads via the I2C
interface.

This device contains 4 register banks for configuring the device called
MREG0, MREG1, MREG2 and MREG3. Unlike other devices from the same
vendor, this contains a very different way of accessing the register
banks apart from the default user bank 0 (MREG0). The register bank access
procedure is mentioned in the datasheet [1] Section 13. Due to this
specific reason and that it doesn't have a gyro sensor, it is implemented
as a standalone driver.

This device has 3 formats for the FIFO structure (datasheet [1] Section
6), currently only FIFO packet format 1 is supported, others
formats can be added as part of future work.

The device supports EDGE and LEVEL triggered interrupts, refer the dt-binding
for example of how the devicetree should be setup.

The driver is inspired from iio/imu/inv_icm42600.

Thanks to the reviewers for all the time you spent going through the
code and the comments. The changes for v2 are quite a lot and I hope
that every important change is documented in the changelog. After
implementing the suggested changes, the driver is in a far better state
than v1.

[1] https://uat.invensense.com/en-us/products/3-axis/icm-42370-p

Signed-off-by: Kanak Shilledar <[email protected]>
---
Changes in v2:
* Changes across all files
- Update MAINTAINERS with company mailing list
- Sort/Cleanup of includes
- Use `guard(mutex)` and newer `pm_runtime` APIs
- Fix code formatting and add empty lines
- Be consistent in inv_icm42370_data variable name
- Fix MODULE_DESCRIPTION
- Drop secondary state struct and merge it's properties in
  `inv_icm42370_data` struct
- Update mreg_read/write function calls
- Change the compatible and filename to `icm42370p`

* Changes to dt-binding
- Add dependencies property
- Made vdd and vddio supply as required
- Add description to drive-open-drain property
- Add mount-matrix property
- Add interrupt-names property

* Changes to `inv_icm42370.h` and `inv_icm42370_buffer.h`:
- Resturcture the file according to @Marcelo's advice
- Move struct __aligned properties to the end

* Changes to `inv_icm42370_core.c`:
- Fix _accel_scale[] values
- Add IIO_TIMESTAMP to channel spec
- Update mreg_read/write to fix bank access
- Replace usleep_range() with fsleep()
- Use constants from linux/units.h
- Call `_update_fifo_period()` after updating the ODR values
- Fix mathematical error in offset calculation
- Implement handling of mount matrix
- Implement handling of named interrupts
- Use devm_regulator_get_enable for the vdd/vddio regulators
- Use better error handling
- Move iio device registration after performing IRQ init

* Changes to `inv_icm42370_i2c.c`
- Change compatible string as per the binding
- Use named identifiers
- Add `id_table` to the i2c_driver struct

* Changes to `inv_icm42370_buffer.c`
- Update FIFO enable/disable logic
- Update FIFO buffer to match the specification and handle increased
  size dynamically.

- Link to v1: https://patch.msgid.link/[email protected]

To: Kanak Shilledar <[email protected]>
To: Henrik Grimler <[email protected]>
To: Jonathan Cameron <[email protected]>
To: David Lechner <[email protected]>
To: Nuno Sá <[email protected]>
To: Andy Shevchenko <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
Kanak Shilledar (3):
      dt-bindings: Add InvenSense ICM-42370-p accelerometer
      iio: accel: Add support for ICM42370P
      iio: accel: icm42370: Add FIFO buffer functionality

 .../bindings/iio/accel/invensense,icm42370p.yaml   |   84 ++
 MAINTAINERS                                        |    9 +
 drivers/iio/accel/Kconfig                          |   18 +
 drivers/iio/accel/Makefile                         |    6 +
 drivers/iio/accel/inv_icm42370.h                   |  352 +++++
 drivers/iio/accel/inv_icm42370_buffer.c            |  496 +++++++
 drivers/iio/accel/inv_icm42370_buffer.h            |  100 ++
 drivers/iio/accel/inv_icm42370_core.c              | 1502 ++++++++++++++++++++
 drivers/iio/accel/inv_icm42370_i2c.c               |   93 ++
 9 files changed, 2660 insertions(+)
---
base-commit: 350d1fb9204b13c5f95e511e98b8bcb47574d425
change-id: 20260629-b4-inv_icm42370p-ccd671066bcf

Best regards,
--  
Kanak Shilledar <[email protected]>