[PATCH v3 10/14] iio: adc: ad7768: Register GPIO auxiliary device

Register an auxiliary device when the AD7768 is described as a GPIO
controller. This allows the GPIO driver to share the parent regmap and
runtime power-management state.

Signed-off-by: Janani Sunil <[email protected]>
---
 drivers/iio/adc/ad7768.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/iio/adc/ad7768.c b/drivers/iio/adc/ad7768.c
index d7151b1fa863..6df219610b65 100644
--- a/drivers/iio/adc/ad7768.c
+++ b/drivers/iio/adc/ad7768.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/array_size.h>
+#include <linux/auxiliary_bus.h>
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/cleanup.h>
@@ -1209,6 +1210,27 @@ static void ad7768_set_available_sampl_freq(struct ad7768_state *st)
 	}
 }
 
+static int ad7768_gpio_adev_init(struct ad7768_state *st)
+{
+	struct device *dev = regmap_get_device(st->regmap);
+	struct spi_device *spi = to_spi_device(dev);
+	struct auxiliary_device *adev;
+	int id;
+
+	if (!device_property_read_bool(dev, "gpio-controller"))
+		return 0;
+
+	/* Use the SPI bus number and chip select to derive a stable per-device ID. */
+	id = (spi->controller->bus_num << 8) | spi_get_chipselect(spi, 0);
+	adev = __devm_auxiliary_device_create(dev, KBUILD_MODNAME, "gpio",
+					      NULL, id);
+	if (!adev)
+		return dev_err_probe(dev, -ENODEV,
+				     "Failed to create GPIO auxiliary device\n");
+
+	return 0;
+}
+
 static int ad7768_set_filter_mode(struct iio_dev *indio_dev,
 				  const struct iio_chan_spec *chan,
 				  unsigned int mode)
@@ -1585,6 +1607,10 @@ static int ad7768_probe(struct spi_device *spi)
 
 	indio_dev->setup_ops = &ad7768_buffer_ops;
 
+	ret = ad7768_gpio_adev_init(st);
+	if (ret)
+		return ret;
+
 	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
 		return ret;

-- 
2.43.0