[PATCH v4 1/6] dt-bindings: iio: dac: ad5504: add output-range and missing gpios

The AD5504 output range (0-30V or 0-60V) is determined by the R_SEL pin.

Use standard output-range-microvolt and range-sel-gpios properties to
describe the hardware configuration of the R_SEL pin. Ensure mutual
exclusivity using the not/required logic. Additionally, add missing
vlogic-supply, clr-gpios, ldac-gpios and datasheet links, and provide
a complete usage example.

Signed-off-by: Taha Ed-Dafili <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
 .../bindings/iio/dac/adi,ad5504.yaml          | 39 ++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
index 9c2c038683b4..e0123dceaa33 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
@@ -10,8 +10,10 @@ maintainers:
   - Lars-Peter Clausen <[email protected]>
   - Jonathan Cameron <[email protected]>
 
-description:
+description: |
   High voltage (up to 60V) DACs with temperature sensor alarm function
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad5504.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad5501.pdf
 
 properties:
   compatible:
@@ -27,6 +29,29 @@ properties:
     maxItems: 1
 
   vcc-supply: true
+  vlogic-supply: true
+
+  output-range-microvolt:
+    description: |
+      Specify the channel output full scale range. The R_SEL pin
+      determines if the range is 0-30V or 0-60V.
+    items:
+      - const: 0
+      - enum: [30000000, 60000000]
+    default: [0, 60000000]
+
+  range-sel-gpios:
+    description:
+      GPIO connected to the R_SEL pin to select the output voltage range.
+    maxItems: 1
+
+  clr-gpios:
+    description: GPIO that controls the /CLR pin (active low).
+    maxItems: 1
+
+  ldac-gpios:
+    description: GPIO that controls the /LDAC pin (active low).
+    maxItems: 1
 
 additionalProperties: false
 
@@ -34,9 +59,17 @@ required:
   - compatible
   - reg
 
+allOf:
+  - not:
+      required:
+        - range-sel-gpios
+        - output-range-microvolt
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,6 +78,10 @@ examples:
             compatible = "adi,ad5504";
             vcc-supply = <&dac_vcc>;
             interrupts = <55 IRQ_TYPE_EDGE_FALLING>;
+
+            output-range-microvolt = <0 60000000>;
+            clr-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
         };
     };
 ...
-- 
2.55.0