Re: [PATCH v5 0/6] io: accel: mma8452: Allow open drain interrupt pin configuration

On Mon, 17 Aug 2026 19:20:22 +0200
Esben Haabendal <[email protected]> wrote:

> Extend the mma8452 driver with support for configuration of the
> interrupt line in open-drain mode, which is needed for hardware designs
> where the interrupt line is shared with other chips.
> 
> Adding drive-open-drain property to mma8452 device-tree node for such
> designs to enable switching pin configuration to open-drain mode.
> 
> Signed-off-by: Esben Haabendal <[email protected]>

Hi Esben,

Seems something throttled your mail. Only 0-3 made it to the list.
Please resend and mark it [RESEND PATCH ...
with a brief statement of why in the cover letter.

Thanks

Jonathan

> ---
> Changes in v5:
> - Squashed dev_err_probe() call to one line.
> - Fixed typo in patch 2 title.
> - Added synchronization between runtime suspend and interrupt handler.
> - Link to v4: https://patch.msgid.link/[email protected]
> 
> Changes in v4:
> - Fixed interrupt handler to check runtime PM status before trying to
>   access the chip.
> - Split open-drain support and interrupt sharing into separate patches.
> - Added new patch to reuse existing struct device * through mma8452_probe()
>   function.
> - Print warning message when irq type is not set by firmware.
> - Link to v3: https://patch.msgid.link/[email protected]
> 
> Changes in v3:
> - Reordered patches, swapping #2 and #3.
> - Always add IRQF_SHARED flag.
> - New patch to change it so IQRF_TRIGGER_LOW flag is only added when no
>   trigger type is set by firmware.
> - Link to v2: https://patch.msgid.link/[email protected]
> 
> Changes in v2:
> - Commit message of patch 2 updated.
> - Operator precedence bug fixed in flags argument to
>   request_threaded_irq().
> - Always check return value of mma8452_set_interrupt_pin_mode(), and just
>   check for non-zero value.
> - Added new patch with optimization of struct mma8452_data ordering.
> - Link to v1: https://patch.msgid.link/[email protected]
> 
> To: Jonathan Cameron <[email protected]>
> To: Lars-Peter Clausen <[email protected]>
> To: Rob Herring <[email protected]>
> To: Krzysztof Kozlowski <[email protected]>
> To: Conor Dooley <[email protected]>
> To: Martin Kepplinger <[email protected]>
> To: Sean Nyekjaer <[email protected]>
> To: David Lechner <[email protected]>
> To: Nuno Sá <[email protected]>
> To: Andy Shevchenko <[email protected]>
> To: Martin Kepplinger <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> 
> ---
> Esben Haabendal (6):
>       dt-bindings: iio: accel: mma8452: Add drive-open-drain
>       iio: accel: mma8452: Optimize struct mma8452_data member orders
>       iio: accel: mma8452: Only apply trigger type when not set by firmware
>       iio: accel: mma8452: Support interrupt sharing
>       iio: accel: mma8452: Allow open drain interrupt pin configuration
>       iio: accel: mma8452: Reuse existing dev pointer in mma8452_probe()
> 
>  .../devicetree/bindings/iio/accel/fsl,mma8452.yaml |  6 ++
>  drivers/iio/accel/mma8452.c                        | 98 ++++++++++++++++------
>  2 files changed, 80 insertions(+), 24 deletions(-)
> ---
> base-commit: db2ddb87143519e20a95aa36c60b36107b736a58
> change-id: 20250401-mma8452-open-drain-81577c41375c
> 
> Best regards,
> --  
> Esben Haabendal <[email protected]>
>