Re: [PATCH v2 4/5] iio: light: stk3310: add per-chip match data

Andy Shevchenko <[email protected]>
Newsgroups org.kernel.vger.linux-iio,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-hardening,org.kernel.vger.linux-kernel
Organization Intel Finland Oy - BIC 0357606-4 - c/o Alberga Business Park, 6 krs, Bertel Jungin Aukio 5, 02600 Espoo
Message-ID <[email protected]>
On Wed, Aug 26, 2026 at 07:54:08PM +0200, Jorijn van der Graaf wrote:
> Introduce a chip_info structure carrying the device name and channel
> specification, attach it to every i2c, OF and ACPI table entry, and
> let probe take it from the match data, failing when there is none.
> Every firmware bind path carries match data, and with the id names in
> lower case a client instantiated through the sysfs new_device
> interface under a compatible-derived name receives it through the id
> table. The shared channel definitions move into macros.
> 
> The ACPI table entries change to named initializers, matching the
> other id tables.
> 
> This is a preparatory change for a variant that provides more channels
> than the existing parts. No functional change for firmware-described
> devices; a sysfs client under a name that binds without matching any
> id entry (the full compatible string) now fails probe with an error
> instead of probing as an stk3310.

...

> +/**
> + * struct stk3310_chip_info - chip-specific data
> + * @name: device name reported to the IIO core
> + * @channels: channel specification
> + * @num_channels: number of channels
> + */
> +struct stk3310_chip_info {
> +	const char			*name;
> +	const struct iio_chan_spec	*channels __counted_by_ptr(num_channels);
> +	unsigned int			num_channels;

I don't think we need tab-based indentation of the field names.

> +};

...

>  static int stk3310_probe(struct i2c_client *client)
>  {
> +	const struct stk3310_chip_info *chip_info;

	struct device *dev = &client->dev;

>  	int ret;
>  	struct iio_dev *indio_dev;
>  	struct stk3310_data *data;
>  
> +	chip_info = i2c_get_match_data(client);
> +	if (!chip_info)
> +		return dev_err_probe(&client->dev, -ENODEV,
> +				     "missing driver data\n");

Use -ENODATA

		return dev_err_probe(dev, -ENODATA, "missing driver data\n");

>  	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>  	if (!indio_dev)
>  		return -ENOMEM;

-- 
With Best Regards,
Andy Shevchenko
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.