[PATCH 0/2] HID: Intel-thc-hid: Support complete I2C bus configuration

The Intel THC QuickI2C driver currently configures only the target
address, bus speed, and SCL high and low periods. Additional timing
parameters supplied by firmware are not applied to the I2C sub-IP.

Introduce a common I2C configuration structure in the THC core and use
it to configure the target address, addressing mode, bus speed, SCL
timings, and SDA transmit and receive hold periods. Populate this
structure from the QuickI2C ACPI resources so that platform-specific
timings are restored during both initialization and resume.

Even Xu (2):
  HID: Intel-thc-hid: Intel-thc: Refactor I2C bus configuration with
    unified config structure
  HID: Intel-thc-hid: Intel-quicki2c: Support full I2C BUS config
    parameters

 .../intel-quicki2c/pci-quicki2c.c             | 46 +++++++------
 .../intel-quicki2c/quicki2c-dev.h             | 14 ++--
 .../intel-thc-hid/intel-thc/intel-thc-dev.c   | 69 ++++++++++++-------
 .../intel-thc-hid/intel-thc/intel-thc-dev.h   | 23 ++++++-
 .../intel-thc-hid/intel-thc/intel-thc-hw.h    |  3 +
 5 files changed, 97 insertions(+), 58 deletions(-)

-- 
2.43.0