[PATCH] Input: xpad - add out-of-bounds checks for xpadone

Add size checks for the "len" variable in xpadone_process_packet().
This prevents out-of-bounds accesses to the "data" buffer, as "len"
comes directly from the hardware.

Assisted-by: gkh_clanker_t1000
Signed-off-by: Griffin Kroah-Hartman <[email protected]>
---
 drivers/input/joystick/xpad.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index feb8f368f834..abda6b5c7c95 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -1035,8 +1035,14 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 	struct input_dev *dev = xpad->dev;
 	bool do_sync = false;
 
+	if (len < 2)
+		return;
+	len = min(len, XPAD_PKT_LEN);
+
 	/* the xbox button has its own special report */
 	if (data[0] == GIP_CMD_VIRTUAL_KEY) {
+		if (len < 5)
+			return;
 		/*
 		 * The Xbox One S controller requires these reports to be
 		 * acked otherwise it continues sending them forever and
@@ -1052,6 +1058,8 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 	} else if (data[0] == GIP_CMD_FIRMWARE) {
 		/* Some packet formats force us to use this separate to poll paddle inputs */
 		if (xpad->packet_type == PKT_XBE2_FW_5_11) {
+			if (len < 20)
+				return;
 			/* Mute paddles if controller is in a custom profile slot
 			 * Checked by looking at the active profile slot to
 			 * verify it's the default slot
@@ -1079,6 +1087,8 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 					 error);
 		}
 	} else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */
+		if (len < 18)
+			return;
 		/* menu/view buttons */
 		input_report_key(dev, BTN_START,  data[4] & BIT(2));
 		input_report_key(dev, BTN_SELECT, data[4] & BIT(3));
@@ -1145,13 +1155,18 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 		}
 
 		/* Profile button has a value of 0-3, so it is reported as an axis */
-		if (xpad->mapping & MAP_PROFILE_BUTTON)
+		if (xpad->mapping & MAP_PROFILE_BUTTON) {
+			if (len < 35)
+				return;
 			input_report_abs(dev, ABS_PROFILE, data[34]);
+		}
 
 		/* paddle handling */
 		/* based on SDL's SDL_hidapi_xboxone.c */
 		if (xpad->mapping & MAP_PADDLES) {
 			if (xpad->packet_type == PKT_XBE1) {
+				if (len < 33)
+					return;
 				/* Mute paddles if controller has a custom mapping applied.
 				 * Checked by comparing the current mapping
 				 * config against the factory mapping config
@@ -1165,6 +1180,8 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 				input_report_key(dev, BTN_GRIPL, data[32] & BIT(0));
 				input_report_key(dev, BTN_GRIPL2, data[32] & BIT(2));
 			} else if (xpad->packet_type == PKT_XBE2_FW_OLD) {
+				if (len < 20)
+					return;
 				/* Mute paddles if controller has a custom mapping applied.
 				 * Checked by comparing the current mapping
 				 * config against the factory mapping config
@@ -1178,6 +1195,8 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 				input_report_key(dev, BTN_GRIPL, data[18] & BIT(2));
 				input_report_key(dev, BTN_GRIPL2, data[18] & BIT(3));
 			} else if (xpad->packet_type == PKT_XBE2_FW_5_EARLY) {
+				if (len < 24)
+					return;
 				/* Mute paddles if controller has a custom mapping applied.
 				 * Checked by comparing the current mapping
 				 * config against the factory mapping config

---
base-commit: f5098b6bae761e346ebcd9da7f95622c04733cff
change-id: 20260727-xpadone_length_checks-08120b97764f

Best regards,
--  
Griffin Kroah-Hartman <[email protected]>