[PATCH v7 0/8] HID: steelseries: split out Arctis driver and add Nova 5X/Nova 7 support

This series moves the SteelSeries Arctis headset support out of
hid-steelseries.c into its own module, reworks it around a per-model
device_info table, hardens the battery power-supply lifetime, adds an
asynchronous status interface, and finally adds support for the Arctis
Nova 5X and Nova 7 families. After the split, hid-steelseries.c is left
handling the SRW-S1 racing wheel and the MSI RGB LED devices.

Changes since v6:
 - Rebased onto hid.git#for-7.3/steelseries.
   - The split now leaves the MSI RGB code in hid-steelseries.c
     alongside SRW-S1, and strips only the headset members from
     struct steelseries_device. The MSI RGB quirk bit is renumbered
     to BIT(1) since the two Arctis bits are gone.
   - The Arctis hardening that came with the MSI commit moves into
     hid-steelseries-arctis.c with the rest of the headset code: the
     hdev->rsize < 3 guard in steelseries_is_vendor_usage_page(), the
     battery_registered store/load-acquire pair, the !sd checks, and
     the hid_hw_stop() on the hid_hw_open() error path. The
     steelseries_is_headset() dispatch is dropped, as the new module
     only binds headsets. The battery_registered flag then goes away
     in patch 3, where the device_info rework guards every
     power_supply_changed() on sd->battery instead.
   - The v6 patch "HID: steelseries: Inline and simplify SRWS1 wheel
     driver" is dropped. Its premise was that hid-steelseries.c only
     handles the SRW-S1 after the split, which is no longer true.
 - No other changes. The resulting hid-steelseries-arctis.c is
   byte-identical to v6.

Each patch builds cleanly with CONFIG_HID_STEELSERIES=m, both with and
without CONFIG_LEDS_CLASS_MULTICOLOR.

The Nova 5X protocol was verified against hardware by
[email protected], and the original Nova 7 protocol was verified
against hardware by [email protected]. Thanks to both for testing. I
previously ommited other devices in the v4 patch series due to being
unable to verify.

Sriman Achanta (8):
  HID: steelseries: Fix ARCTIS_1_X device mislabeling
  HID: steelseries: Split Arctis headset driver into separate module
  HID: steelseries: Refactor Arctis driver to use device_info framework
  HID: steelseries: Report POWER_SUPPLY_STATUS_FULL when full
  HID: steelseries: Correct Arctis 9 battery calibration range
  HID: steelseries: Manage battery lifetime with refcounting
  HID: steelseries: Add async status interface support
  HID: steelseries: Add support for Arctis Nova 5X and Nova 7 families

 drivers/hid/Makefile                 |   2 +-
 drivers/hid/hid-ids.h                |  18 +-
 drivers/hid/hid-quirks.c             |  16 +-
 drivers/hid/hid-steelseries-arctis.c | 718 +++++++++++++++++++++++++++
 drivers/hid/hid-steelseries.c        | 366 +-------------
 5 files changed, 751 insertions(+), 369 deletions(-)
 create mode 100644 drivers/hid/hid-steelseries-arctis.c


base-commit: 2346d6997b70dae1f8302fd029aa422e28112eaa
-- 
2.55.0