Re: [PATCH] tpm_tis: Check for an error after exhausting send retires

Jarkko Sakkinen <[email protected]>
Newsgroups org.kernel.vger.linux-integrity,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
On Fri, Apr 10, 2026 at 09:13:50PM +0000, Jacqueline Wong wrote:
> From: Jordan Hand <[email protected]>
> 
> tpm_tis_send_main() will attempt to retry sending data TPM_RETRY times.
> Currently, if those retries are exhausted, the driver will attempt to
> call execute. The TPM will be in the wrong state, leading to the
> operation simply timing out.
> 
> Instead, if there is still an error after retries are exhausted, return
> that error immediately.
> 
> Additionally, add logging to more easily determine reason for transmit
> failure.
> 
> Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors")
> Signed-off-by: Jordan Hand <[email protected]>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index e2a1769081b1..b78937841879 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -471,6 +471,8 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
>  		status = tpm_tis_status(chip);
>  		if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
>  			rc = -EIO;
> +			dev_err(&chip->dev, "TPM_STS_DATA_EXPECT should be set. sts = 0x%08x\n",
> +					status);
>  			goto out_err;
>  		}
>  	}
> @@ -491,6 +493,8 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
>  	status = tpm_tis_status(chip);
>  	if (!itpm && (status & TPM_STS_DATA_EXPECT) != 0) {
>  		rc = -EIO;
> +		dev_err(&chip->dev, "TPM_STS_DATA_EXPECT should be unset. sts = 0x%08x\n",
> +				status);
>  		goto out_err;
>  	}
>  
> @@ -552,11 +556,16 @@ static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
>  			break;
>  		else if (rc != -EAGAIN && rc != -EIO)
>  			/* Data transfer failed, not recoverable */
> -			return rc;
> +			goto out_err;
>  
>  		usleep_range(priv->timeout_min, priv->timeout_max);
>  	}
>  
> +	if (rc == -EAGAIN || rc == -EIO) {
> +		dev_err(&chip->dev, "Exhausted tpm_tis_send_data retries\n");
> +		goto out_err;
> +	}
> +
>  	/* go and do it */
>  	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
>  	if (rc < 0)
> -- 
> 2.53.0.1213.gd9a14994de-goog
> 

CHECK: Alignment should match open parenthesis
#35: FILE: drivers/char/tpm/tpm_tis_core.c:475:
+                       dev_err(&chip->dev, "TPM_STS_DATA_EXPECT should be set. sts = 0x%08x\n",
+                                       status);

CHECK: Alignment should match open parenthesis
#44: FILE: drivers/char/tpm/tpm_tis_core.c:497:
+               dev_err(&chip->dev, "TPM_STS_DATA_EXPECT should be unset. sts = 0x%08x\n",
+                               status);


I fixed these manually.

Good catch, thanks:

Reviewed-by: Jarkko Sakkinen <[email protected]>

Applied.

BR, Jarkko
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.